Catalog Advanced Search

• Single speed blower switch
• On-Off
• Baby blue
• Fits hole 7/8 x 1-1/2"
• DPST
• 4 terminals, 1/4" tabs
• 15A/125V, 10A/250V
• For 208V units
• Use on various Blodgett models such as: CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable

• Door Hinge Bushing (2/Pkg)
• Brass
• 5/8" ID x 7/8" OD
• Used on various Blodgett models such as AC-500, BDO-100G-ES, BDO-G, CTB, CTB POPEYES, CTB XCEL, CTB SERIES, CTB WENDYS, CTB-AP, CTBR, CTBR XCEL, CTBR POPEYES, CTBR-AP, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, DFG-50 POPEYES, DFG-100-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100 XCEL, MARK V XCEL SERIES, MARK V-IIIH, MARK V-IIIHD, SHO SERIES, SHO-E, SHO-G, SHO-100E, SHO-100G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 100G ES, ZEPHAIREG PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G, CTB1, CTB2, CTBR1, DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3 and where part is applicable. 

• Buzzer w/Bracket
• 240V Coil
• 2 terminals, 2 each 3/16" insulated F push-on
• Commonly used on various BLODGETT models such as: 1200, 1201, 1214, 1400, 1405, 1415, AC-500, BC-20G, BC14G OLD, BC20G, BP-100, BP-50, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3270E, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE, RE SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 50E, ZEPHAIRE 100E, ZEPHAIRE E, ZEPHAIRE 200E and where part is applicable.
• For models COS-5HD, COS-5HS, with serial # HU & HY

• This is a replacement for the Furnas model, it is obsolete. This is by Hartland
• 208V/240V Coil
• 50A
• 3 Pole
• (Replaces Blodgett 480V 2SP on model EF111)
• Commonly used on models Blodgett models such as: 1200, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, EZE SERIES, EF SERIES, EF-111, SHO-E, SHO-100E, MARK V KFC, MARK V, MARK V-100, MARK V-200, MARK V SERIES, RE SERIES, ZEPHAIRE 240E PLUS, ZEPHAIRE 50E, ZEPHAIRE E, ZEPHAIRE 100E, ZEPHAIRE 200E and where part is applicable.

• Temp Controller
• Solid State  
• 3" x 2-1/2" x 1-3/4"
• 200-500 degrees F
• Commonly used on Blodgett models such as BDO-100G-ES, BDO-G, COS-20G, DFG-100, DFG-200, Mark V, Mark V KFC, Mark V Series, Mark V-100, Mark V-200, SHI-E, SHI-G, SHO-E, SHO-G, SHO-100E, SHO-100G, ST-300 AA, ST-300 AB, Zephaire 240E Plus, Zephaire 240G Plus, Zephaire 50E, Zephaire E, Zephaire G, Zephaire G Plus, Zephaire 100E, Zephaire 100G, Zephaire 200E, Zephaire 200G and where part is applicable.
• Oven ST-300, Zephaire 50E, Zephaire E & G with solid state control.

• Commonly Used on various BLODGETT models such as: BP-100, BP-50, SHO-E, SHO-G, SHO SERIES, SHO-100E, SHO-100G and where part is applicable.

• Commonly used on various BLODGETT models such as: MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO-100E, SHO-E, ZEPHAIRE E, ZEPHAIRE 200E and where part is applicable.

• Commonly used on various BLODGETT models such as: BDO-100G-ES, DFG-100 XCEL, DFG-100-ES, MARK V XCEL, MARK V-100 XCEL, SHO-100E, SHO-E, ZEPHAIRE 240E PLUS, ZEPHAIRE 100E, ZEPHAIRE 200E, ZEPHAIRE 100G ES and where part is applicable.

• Commonly used on various BLODGETT models such as: SHO-100E, SHO-E, ZEPHAIRE 240E PLUS, ZEPHAIRE 100E, ZEPHAIRE E, ZEPHAIRE 200E and where part is applicable.

• Draft Converter
• Stainless steel
• Canopy vent 
• Commonly used on various BLODGETT models such as:  1000, 1048DD, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, AC-500, AC-500 XCEL, DFG-100, DFG-100 XCEL, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, L900, MARK V XCEL SERIES, MARK V XCEL, MARK V-100 XCEL, S900, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• Element
• New style is round.
• 22" x 12"
• 1-3 phase
• 240V
• 10000W
• 3 element unit complete
• Commonly used on various BLODGETT models such as: MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO-E, SHO-100E, ZEPHAIRE 240E PLUS, ZEPHAIRE E, ZEPHAIRE 100E, ZEPHAIRE 200E and where part is applicable.

• Element assembly
• New style, round
• 440V
• 10,000W
• Commonly used on various BLODGETT models such as: MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V XCEL, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO-100E, SHO-E, ZEPHAIRE E, ZEPHAIRE E PLUS, ZEPHAIRE 200 and where part is applicable.

• Oven Element Assembly
• New round style
• 10,000 watts
• Circular element is new style and replaces old oblong style. 
• Old style 12 x 22" oblong
• Commonly used on various BLODGETT models such as: MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO-E, SHO-100E, ZEPHAIRE 240E PLUS, ZEPHAIRE E, ZEPHAIRE 100E, ZEPHAIRE 200E and where part is applicable.

Oversize carrier fees apply.

• Fan Guard
• Wire
• 4-1/8" center holes
• Commonly used on various BLODGETT models such as: AC-500 XCEL, BC14G SERIES, B14G, BC14G, BC-20E, BC20G, BP-100, BP-50, MARK V XCEL, MARK V-100 XCEL, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT3240E, MT3240G, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE, SHO SERIES, SHO-100E, SHO-100G, SHO-E, DZ3311, PS570G and where part is applicable.

• Flue Box Assembly
• For Single Oven
• 24" x 4-3/16"x 4-5/8"
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G and where part is applicable.
  

• KTK-R-10, FUSE,
• 600V,
• 10 AMP, FAST ACTING
• 13/32" X 1 1/2"
• Commonly used on various BLODGETT models such as:  CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD, RE SERIES, SHO-E, ZEPHAIRE 50E, ZEPHAIRE E, ZEPHAIRE 200E and where part is applicable.

• Stainless Steel Kit
• This is a set for one door
• 4 pieces
• With all screws
• Stainless Steel
• 29-1/4"
• 23" 
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-100 XCEL, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: BCX-14, BCX-14E, BCX-14G, BDO-G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, DFG-100 XCEL, HV-100E, CTB XCEL, CTB XCEL, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO-100E, SHO-E, XR8E, XR8G, ZEPHAIRE 240E PLUS, ZEPHAIRE E, ZEPHAIRE 100E, ZEPHAIRE 200E and where part is applicable.

• Element Harness
• Commonly used on various BLODGETT models such as:  SHO-100E, SHO-E, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD and where part is applicable.
  

• Commonly used on various BLODGETT models such as:  SHO-100E, SHO-E, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.
  

• Knob (For Thermostat) 
• 200-500 F
• Commonly used on various BLODGETT models such as:  CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, SHO-G, SHO SERIES, SHO-E, SHO-100E, SHO-100G, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE E PLUS, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Door assembly
• With glass
• Left hand door
• Commonly used on various BLODGETT models such as:  BDO-100G-ES, BDO-G, DFG-100, DFG-100-ES, DFG-200, DFG-200-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO-E, SHO-G, SHO-100E, SHO-100G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G, ZEPHAIRE 100G ES and where part is applicable.  

Doors are not returnable per the factory. If not sure, call us to review before ordering. Have model and serial number ready.

• Commonly used on various BLODGETT models such as: BCS-6, BCX-14, BCX-14E, BCX-14G, BDO-100G-ES, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, COS-6, CTB, DFG-100, DFG-100 XCEL, DFG-200, DFG-100-ES, HV-100E, HV-100G, MARK V XCEL SERIES, SHO-E, SHO-G, SHO-100E, SHO-100G, ZEPHAIRE 100G ES and where part is applicable.

• Leg Set
• Qty 4
• W/ Feet
• Stainless Steel
• Commonly used on various BLODGETT models such as: B14G, BC14G SERIES, BCS-6, BCS-8E, BCS-8G, BCX-14E, BCX-14G, BP-100, BP-50, BX-14E, BX-14G, CNV-8E, CNV-8G, CNVX-14E, CNVX-14G, COS-6, COS-8E, COS-8EDS, COS-8G, COS-8GDS, DFG-100, DFG-100 XCEL, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, HV-100E, HV-100G, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, RE SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, WPB WARMER, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 100G ES, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100 XCEL, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G and where part is applicable.

• Liner Baffle guard Assembly
• Porcelain Cover
• (covers blower wheel )
• Commonly used on various BLODGETT models such as: DFG-50, EF SERIES, EF-111, EZE SERIES,  MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD, RE SERIES, SHO-100E, SHO-E, ZEPHAIRE 240E PLUS, ZEPHAIRE E, ZEPHAIRE 100E, ZEPHAIRE 200E and where part is applicable.

• Pressure Lock Door Seal
• Mounts to front of door
• Stainless steel
• 22-1/2" long
• 1-1/4" wide
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.

NOTE:  For Units BEFORE May 2009.

• Mechanical Timer, manual 
• 0-60 minute top range
• 6 Second Ring
• With Knob
• Commonly used on various BLODGETT models such as: 1200, 1201, 1214, CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, WPB WARMER, ZEPHAIRE E, ZEPHAIRE G (with Mechanical Controls), ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.

• Switch Kit
• Commonly used on various BLODGETT models such as:  AC-500 XCEL, CTB, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO-100E, SHO-100G, SHO-E, SHO-G and where part is applicable.
  

• Blower Motor
• NOTE: 200-240V
• 50/60hz
• 1 Phase
• 1 or 2 Speed
• 1/3 HP
• Shaft diameter 5/8"
• 1725/1140 RPM
• J56Z frame
• 5/8 x 3-1/4 shaft
• Commonly used on various Blodgett models such as DFG-50, EF Series, EF-111, EZE Series, FA Series, FA100, FA200, FA300, GZL Series, GZL-10, Mark V, Mark V KFC, Mark V Series, Mark V XCEL Series, Mark V-100, Mark V-200, Mark V-IIIH, Mark V-IIIHD, RE Series, SHO-100E, SHO-E, Zephaire 240E Plus, Zephaire E, Zephaire 100E, Zephaire 200E and where part is applicable.

• Commonly used on various BLODGETT models such as: SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G and where part is applicable.

• Upper Door Hinge Pin
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-100 XCEL, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Pressure Lock
• Mounts to side of door
• Commonly used on various BLODGETT models such as:  BDO-100G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200G, ZEPHAIRE 100G ES and where part is applicable.

NOTE:  For Units AFTER May 2009 

• Rocker Switch
• Red
• Fits hole 7/8 x 1-1/2"
• ON/ON
• Chrome bezel
• 'MAN/AUTO'
• Cool down
• 15A-125V, 10A-250V
• 6 x 1/4" tab terminals
• Commonly used on various BLODGETT models such as: BDO-100G-ES, BDO-G, CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE E PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 100G ES, ZEPHAIRE 200E,ZEPHAIRE 200G and where part is applicable.

• Relay
• DPST
• 25A
• 24V
• 6 Terminals, spade
• Commonly used on various BLODGETT models such as:  AC-500 XCEL, BDO-100-G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Upper Door Bushing Sleeve
• Commonly used on various BLODGETT models such as: BDO-100G-ES, DFG-100, DFG-200, DFG-300 (After 1/83), DFG-100 XCEL, DFG-100-ES, DFG-200-ES, KCO-25E, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Support Assembly, Door Lower
• Complete Turnbuckle Assembly
• Used on various Blodgett models such as: BDO-100G-ES, BDO-G, SHO-100E, SHO-100G, SHO-E, SHO-G, SHO SERIES and where part is applicable. 

• Thermostat
• Commonly used on various BLODGETT models such as:  CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE E, ZEPHAIRE E PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Window Installation Tool
• Stainless Steel
• Used to install Blodgett glass window
• Commonly used on various BLODGETT models such as: BDO-100G-ES, BDO-G, CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, MARK V XCEL SERIES, MARK V-100 XCEL, SHO-100E, SHO-100G, SHO-E, SHO-G,  ZEPHAIRE 100G ES and where part is applicable.

• Commonly used on various BLODGETT models such as: BDO-100G-ES, BDO-G, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G and where part is applicable.

• Center Door Trim Assembly
• Stainless Steel
• 22-1/2"
• 1-3/4" width on folded back side
• 3/4" wide on 5 each stud side
• For Units with Dependent Doors
• Commonly used on various BLODGETT models such as: BDO-100G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V XCEL, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, SHO SERIES, SHO-100E, SHO-100G, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 100G ES, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Vent Assembly
• Used on various Blodgett models such as DFG-100, DFG-200, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS and where part is applicable.