Catalog Advanced Search
32 item(s) were found using the following search criteria
- Model Number: MT1820E
-
BUZZER W/BRACKET 240V
Item No. PD11293
$77.04- Buzzer w/Bracket
- 240V Coil
- 2 terminals, 2 each 3/16" insulated F push-on
- Commonly used on various BLODGETT models such as: 1200, 1201, 1214, 1400, 1405, 1415, AC-500, BC-20G, BC14G OLD, BC20G, BP-100, BP-50, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3270E, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE, RE SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 50E, ZEPHAIRE 100E, ZEPHAIRE E, ZEPHAIRE 200E and where part is applicable.
- For models COS-5HD, COS-5HS, with serial # HU & HY
-
CONTACTOR 208V 40A, RETRO
Item No. PD37958
$344.96- Retro Contactor Kit
- (This replaces the old mercury contactor)
- 240V Coil
- 50A
- 3 Poles
- Commonly used on BLODGETT models: 1400, 1405, 1415, BC14E, BCS-6, BCS-8DS, CNV-14E, COS-101, COS-101S, COS-101SNSF, COS-6, COS-6NSF, CTB, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD, MT1820E, Mark V SERIES, AC-500, CTB, CTB POPEYES, CTBR, CTBR POPEYES, BCS-8E, COS-8E, COS-8EDS, COS-8GDS, MT1820E and where part is applicable.
Note: Comes with din rail, screws, diode, instructions.
If conversion from mercury to the new contactor has already been done, please see our part number PD38818 for replacement.
-
CONTACTOR, 3 POLE 120V COIL
Item No. PD28415
$201.92- Commonly Used on various BLODGETT models such as: MG-32, MG3270, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
-
CONTROL BOARD & DRIVE MOTOR, RETRO KIT
Item No. PD128233
$2,400.00- Retro Kit
- Control Board & Drive Motor Kit
- New Style
- Brushless motor
- Commonly used on various BLODGETT models such as: B48D-GGGG, MT70PH, MT1820E, MT1828G, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT2136E, MT2136G, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270 (After 9/90), MT3270E, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
Change Direction of Motor: There is a two position Jumper marked P1 on the control board. The center pin is common so simply Identify the P 1 and pull the jumper off and put it on the other position to change belt direction.
NOTE: NOT applicable to MG-32 or MG3270. MG-32 or MG3270 must use PD140444.
-
CONTROL FOR BRUSHLESS DC MOTOR
Item No. PD26584
$828.16- Conveyor Motor Control, brushless
- The brushless control does NOT have fuses on it. If yours does you DO NOT have a brushless control and this control will not work.
- You must have installed the brushless kit before you can use this control.
- Commonly used on Blodgett models: MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
- Conveyor Motor Control, brushless
-
CONTROL, CLOSED LOOP
Item No. PD29590
$1,442.02- Gearmotor Control
- Closed loop
- Commonly used on Blodgett models such as: MT1820E and where part is applicable
-
Control, Hot Surface Ignition
Item No. PD11479
$215.93- Hot Surface Ignition Control
- 24v
- 50/60hz
- NEC Class 2
- Commonly used on various BLODGETT models such as: 1048DD, AC-500, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, ST-300 AA, ST-300 AB and where part is applicable.
-
CRUMB PAN IDLE SIDE
Item No. PD38385
$131.93- Commonly used on various BLODGETT models such as: MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE and where part is applicable.
-
ELEMENT 208V 1PH
Item No. PD140378
$1,582.96- Element Assembly
- 208V
- 1PH
- 17" x 7-1/2" x 3-1/8"
- Commonly used on Blodgett models such as: MT1820E and where part is applicable.
-
Fan Guard, 4-1/8" Centers
Item No. PD127934
$19.67- Fan Guard
- Wire
- 4-1/8" center holes
- Commonly used on various BLODGETT models such as: AC-500 XCEL, BC14G SERIES, B14G, BC14G, BC-20E, BC20G, BP-100, BP-50, MARK V XCEL, MARK V-100 XCEL, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT3240E, MT3240G, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE, SHO SERIES, SHO-100E, SHO-100G, SHO-E, DZ3311, PS570G and where part is applicable.
-
GROMMET, RUBBER 5/8 .50HD
Item No. PD173473
$10.90- Commonly used on various BLODGETT models such as: BDO-100G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-200, DFG-100-ES, MARK V-100 XCEL, MARK V XCEL SERIES, MARK V-100 XCEL, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, ZEPHAIRE 100G ES and where part is applicable.
- Commonly used on various BLODGETT models such as: BDO-100G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-200, DFG-100-ES, MARK V-100 XCEL, MARK V XCEL SERIES, MARK V-100 XCEL, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, ZEPHAIRE 100G ES and where part is applicable.
-
HI-LIMIT, SNAP DISC
Item No. PD128275
$70.56- Thermal High Limit Switch
- Hi-Limit, Snap Disc
- Commonly used on various BLODGETT models such as: MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
-
HI-LIMIT, SNAP DISC BLODGETT M1362
Item No. PD127920
$37.66- Snap Disc Hi-Limit
- (2) 1/4" Tab Terminals
- 1-5/8" Mounting Centers
- Commonly used on various BLODGETT models such as: KCO-25E, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT2136E, MT2136G, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
-
KIT,CHIMNEY DBL MT1828 SERV
Item No. PD31056
$442.09- Commonly used on various BLODGETT models such as: MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE and where part is applicable.
- Commonly used on various BLODGETT models such as: MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE and where part is applicable.
-
LEG SET, 4" LEGS
Item No. PD174332
$164.28- Commonly Used on various BLODGETT models such as: 1016BVM, 1400, 1405, 1415, 1500, 1501, BC20G, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB XCEL, CTBR, CTBR POPEYES, CTBR-AP, CTBR XCEL, DFG-50, DFG-50 POPEYES, KCO-25E, MT1820E, U.H.C., UHC-MCD, ZEPHAIRE 50E and where part is applicable.
-
LUG, GROUNDING FOR 6-14 AWG
Item No. PD174559
$10.90- Commonly used on various BLODGETT models such as: 1048DD, CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP, LTO SERIES, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MT1820E, ZEPHAIRE 50E and where part is applicable.
-
Motor, Brushless
Item No. PD61249
$1,047.69- Motor only
- Brushless
- Confirm with serial number for correct part
- Commonly used on Blodgett models such as: MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT2136E, MT2136G, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE and where part is applicable.
Note: Motor only, if changing from old style motor with brushes, you will need to install kit PD128233
-
MOTOR, CONVEYOR GEARMOTOR
Item No. PD29713
$624.41- Gear Motor only
- With encoder and cable
- 24VDC
- Commonly used on various models such as MT1820E and where part is applicable.
-
NAMEPLATE & LIT, #163
Item No. PD174788
$26.20- Commonly used on various BLODGETT models such as: B14G, BC14E, BC14G SERIES, BCS-8DS, BCS-8E, BCS-8G, BP-100, BP-50, CNV-8E, CNV-14E, CNV-8G, COS-101, COS-101S, COS-8E, COS-8EDS, COS-8G, COS-8GDS, CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTB SERIES, CTBR, CTBR POPEYES, CTBR-AP, DFG-50, DFG-50 POPEYES, MT1820E, ZEPHAIRE 50E and where part is applicable.
-
On/Off Gas Valve - 3/4"
Item No. PDG10122
$68.78- On/Off Gas Valve
- Manual ball valve
- 3/4" NPT
- 2-3/8" width
- Commonly used on various BLODGETT models such as: MT2136G, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE, SG2136E, SG2136G and where part is applicable.
-
ORIFICE, BLANK
Item No. PD175003
$10.90- Commonly used on various BLODGETT models such as: MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE ZEPHAIRE 100G ES and where part is applicable.
-
PROBE, RTD 500 OHM
Item No. PD41731
$157.69- Probe
- RTD
- 500 OHM
- T1648
- Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR WENDYS, CTBR-AP, DFG-100, DFG-200, MT1820E and where part is applicable.
-
PRODUCT STOP
Item No. PD38386
$82.27- Commonly used on various BLODGETT models such as MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE and where part is applicable.
-
RELAY & HEAT SINK, MT1820
Item No. PD18617
$375.56- Relay and Heat Sink
- Commonly used on various BLODGETT models such as: MT1820E and where part is applicable.
-
SWITCH, PRESSURE ONLY DOM/CE
Item No. PD176536
$194.61- Pressure Switch
- Commonly used on various BLODGETT models such as: DFG-100, DFG-200, DFG-50, HV-100G, MT1828E, MT1828G, MT2136E, MT2136G, MT3240E, MT3240G, MT3255G, MT3270E, MT3855G, MT3870, MT1820E, MT1828E-CE, MT1828G-CE, MT3255, MT3255-CE, MT3255E, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870-CE, SHO SERIES, SHO-100G, SHO-G, XR8E, XR8G, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.
-
SWITCH, ROCKER ON/OFF
Item No. PD50169
$35.54- Black Rocker Switch
- ON/OFF
- DPDT
- Tab terminals
- Matt black
- Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, MT1820E, ZEPHAIRE 50E and where part is applicable.
-
TERMINAL POWER BLOCK
Item No. PD130381
$299.15- Terminal Power Block
- Commonly used on Blodgett models such as B36N-HHH, BC14E, BCS-6, BCS-8DS, BCS-8E, CNV-8E, COS-101, COS-101NSF, COS-101S, COS-101SNSF, COS-201NSF, COS-20G, COS-5H, COS-5HA, COS-5HB, COS-6, COS-6NSF, COS-8E, COS-8EDS, COS-8GDS, MT1820E, MT2136E, MT2136G, MT3240E, MT3240G, MT3255G, MT3270E, MT3855G, MT3870 and where part is applicable.
-
TIMER, OFF DELAY
Item No. PD36188
$182.66- Solid State timer
- Off delay
- SS
- 5A
- 230V
- Commonly used on various Blodgett models such as: MT1820E and where part is applicable.
-
TIMING BELT
Item No. PD130755
$54.70- Timing Belt
- Commonly used on various BLODGETT models such as: MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE and where part is applicable.
-
TIMING BELT
Item No. PD18613.24
$46.06- Blodgett Timing Belt
- 20" x 3/8" wide
- Pitch .200
- Commonly Used on various Blodgett models such as: MT1820E and where part is applicable.
-
TRANSFORMER, 120 TO 24V, 80VA
Item No. PD176902
$137.50- Commonly used on various BLODGETT models such as: BDO-G, CTB XCEL, CTBR XCEL, HV-100E, HV-50E, KCO-25E, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-C and where part is applicable.
-
TUBING, POLYURETHANE
Item No. PD177024
$3.47- Polyeruthane Tubing
- Sold by the Inch
- Use on Blodgett models such as B36N-HHH, BDO-100G-ES, BDO-G, DFG-100, DFG-100-ES, DFG-200, DFG-200-ES, DFG-50, HV-100G, MT1820E, MT1828E-CE, MT1828G-CE, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G-CE, MT3870-CE, SG3240E, MT1828E, MT1828G, MT2136E, MT2136G, MT3240E, MT3240G, MT3255G, MT3270E, MT3855G, MT3870, SG2136E, SG2136G, SG3240G, SHO SERIES, SHO-100G, SHO-G, ZEPHAIRE G, ZEPHAIREG PLUS and where part is applicable