Catalog Advanced Search

• Arm Assembly Door L/H
• Length is 8-3/4"
• Commonly used on various Blodgett models such as 999, 1000, 1048, 1060, 1200, 1048B, 1048B-CE, 1048BL, 1048BL-CE and where part is applicable.

• Arm Assembly Door R/H
• 8-3/4" overall
• Commonly used on Blodgett models such as 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 1200, 999 and where part is applicable.

• One Set of Three Baking Deck Stone
• 1-1/2" x 24" x 36"  Two each
• 1-1/2 x 12" x 36" one each
• Used on various Blodgett models such as 1060, 1060BL and where part is applicable.

• Burner Divider
• 25" x 3-1/8" x 6-1/4"
• Use on various Blodgett models such as: 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060 and where part is applicable.

• Burner Set
• Left and Right
• Used on Blodgett models 1048DD only with no year exception

USE FOR DUNKIN DONUTS MODELS ONLY

• Pilot Burner - Natural/LP
• 3/16" & 1/4" CCT
• Tube size 1/4"
• Flame pattern straight
• (Used with FMEA Safety)
• Used on various Blodgett models such as 1000, 1048, 1060, 999, 90-M, BCG, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10 and where part is applicable. 
• LP orifice PD114514

• Burners
• Set of 2
• Left hand and Right hand/li>
• 30-3/4" L x 6-1/4" W
• Commonly used on various Blodgett models such as 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 1060B after 7-1986, and where part is applicable. 
• For model 1048DD use part number PD36013

• Commonly Used on various BLODGETT models such as: 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1048, 1060 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1060 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1060 and where part is applicable.

• Deck Seal (crumb catcher)
• 58-5/8" x 4-5'8"
• Commonly used on various Blodgett models such as 1048, 1060 and where part is applicable.

• Steel Deck
• 3 pieces
• Commonly used on various Blodgett models such as: 1060 and where part is applicable.

• Deflector Assembly
• 3 pieces
• Panels
• 2 pieces 20"W x 34"L
• 1 piece, center,  21" x 35-1/2" with lips
• Commonly used on Blodgett model such as 1060 and where part is applicable.

• Deflector Center Panel
• Aluminized Steel
• 20W x 35-1/2L
• 1-1/2" thick 
• 33-1/2 without lips
• Ribs face down
• Commonly used on various Blodgett models such as: 1000, 1048, 999 (Except 1048DD, 1060) and where part is applicable.

• Panel
• Use for Left Hand or Right Hand side.
• Used on various Blodgett models such as: 1060 and where part is applicable.

• Centigrade Dial
• Commonly used on various BLODGETT models such as:  1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, L900, S900 and where part is applicable.

• Main Door Spring
• 8" x 1-3/4" overall
• 4-3/4" body only
• 32 coils
• Commonly used on various BLODGETT models such as: 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060 and where part is applicable.

• Door Turnbuckle Assembly
• Used on various Blodgett models such as B14-G, BCS-6, CTB, HV-100E, HV-100G, HVH-100E, HVH-100G and where part is applicable.

• Draft Diverter
• Stainless steel
• Commonly used on various Blodgett models such as: 999, 1000, 100DS-KLT, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 20DS-KLT, 20DS-KPT, 30DS-KLT, 30DS-KPT, 40DS-KLT, 40DS-KPT, 60DS-KLT, 60DS-KPT, 80DS-KLT, 80DS-KPT and where part is applicable.

• Draft Hood - Direct Vent
• Stainless Steel
• 12" x 24" with 10" round take-off
• 24" x 3" inlet
• 20-1/2" high
• Use on various Blodgett models such as: 999, 1000, 1048, 1060 and where part is applicable.

• Flu Connector
• 24 x 2 x 7-1/4' high
• Galvanized steel
• 24-3/8: screw centers on tabs
• Used for double stacking ovens
• Commonly used on various BLODGETT models such as: 1000, 1048, 1060, 999 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1000, 1048, 1060, 999, 1048B, 1048B-CE, 1048BL, 1048BL-CE and where part is applicable.

• Right hand flue plate assembly
• Used on various Blodgett ovens such as 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 999 and where part is applicable.
• 36-1/4" x 5" x 1/2"

• Manual gas valve without handle (see accessories to the right for add-on items)
• On/Off
• 1/2 inch x 1/2 inch
• Commonly used on various BLODGETT models such as:  901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, L900, S900, 1000, 1048, 1060, 1048B, 1048B-CE, 1048BL, 1048BL-CE, ST-300 AA, ST-300 AB, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, DFG-100, MARK V and where part is applicable.

• Handle
• Chrome
• 3" x 1"
• 1/4" D stem
• Commonly used on various BLODGETT models such as:  1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, BCG, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, L900, S900 and where part is applicable.
• Must provide model and serial number at checkout to confirm accuracy of part. If information not provided, then the part is Non-Returnable. 

• Baking Door Handle
• Comes with mounting screws
• Commonly used on Blodgett models such as 1060 and where part is applicable.

• Door Handle w/Screws
• 12-3/4" screw centers
• Commonly used on various BLODGETT models such as: 901, 911, 916, 931, 951, 961, 966, 981, 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 999, BCG, CTB (After 9/86), CTB POPEYES, CTBR, CTBR POPEYES, DFG-50, DFG-50 POPEYES, ZEPHAIRE 50E and where part is applicable.

• Extension Spring
• 6-1/4" overall x 1-1/2"
• 3-1/2" coil length
• 23 coils
• Commonly used on various BLODGETT models such as: 1048, 1060 and where part is applicable.

• Hinge
• Door link
• Metal
• Commonly used on various Blodgett models such as: 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060 and where part is applicable.

• Hose
• Gas
• Flex
• 1/2"
• Commonly used on various Blodgett models such as: 1048DD, 1060 and where part is applicable.

• Insulation Cover
• Right hand
• Commonly used on Blodgett models such as 999, 1000, 1060 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1048, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, L900, S900 and where part is applicable.

• Knob (For FD Style Thermostat)
• Black with white printed letters
• 2-1/2" diameter
• Flat side down
• 300-650°F
• Commonly used on various BLODGETT models such as:  1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, L900, S900, 900 (Roast & Bak)e and where part is applicable.

• Knob
• Square D
• For gas valve
• CE
• Commonly used on various BLODGETT models such as: 1048, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, AC-500, BCS-8G, CNV-8G, COS-101NSF, COS-101SNSF, COS-201NSF, COS-20G, COS-20NSF, COS-6NSF, COS-8G, COS-8GDS and where part is applicable.

• Legs
• Stainless Steel
• 19"
• Commonly used on various BLODGETT models such as:  1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 1200, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, L900, S900 and where part is applicable.

• Set of 4, 32" SS legs.
• Commonly used on various BLODGETT models such as: 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 1200, 999 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 999 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1060 and where part is applicable.
  

• Commonly used on various BLODGETT models such as 1060 and where part is applicable.

• Blodgett Name Plate
• Metal
• 1-3/4" x 12-3/4"
• Commonly used on various BLODGETT models such as: 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1048DD, 1060, 1200, 1201, 2014, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, 900, DFG-50, EF-111, EF SERIES, EZE SERIES, FA100, FA200, FA300, FA SERIES, GZL-10, GZL SERIES, RE SERIES, L900, S900, WPB WARMER and where part is applicable.

• Commonly used on various BLODGETT models such as: 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 999, BC14G, CNV14G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3270E and where part is applicable.

• Commonly used on various BLODGETT models such as 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, AC-500 XCEL, BCS-8G, B48D-GGGG, CNV-8G, COS-8G, COS-8GDS, DFG-100 XCEL, DFG-50, DFG-50 POPEYES, FA100, FA200, FA300, FA SERIES, GZL-10, GZL SERIES, L900, MT3255, MT3255-CE, MT3255E, MT3255G, MT2136E, MT2136G, MT3270E, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE, S900, SHO SERIES, SHO-100G, SHO-G and where part is applicable.

• Commonly used on various BLODGETT models such as: 1000, 1048, 1048DD, 1060, 999, DFG-100, DFG-50 POPEYES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• Orifice Main
• Set of 2
• #56 (drill size)
• Used on various Blodgett models such as 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1048DD, 1060, 999, DFG-100, DFG-200, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

 NOTE:  Specify gas type and model number of unit when ordering.

• #72
• Specify size to be drilled to
• Commonly used on various BLODGETT models such as: 1048DD, DFG-100, DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3, DFG-200, DFG-50, DFG-50 POPEYES, 999, 1000, 1048, 1060, FA100, FA200, FA300, FA SERIES, GZL SERIES, GZL-10, ZEPHAIRE G and where part is applicable.

• Tube size 1/16"
• Natural gas
• Commonly used on various BLODGETT models such as:  1000, 1048, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, L900, S900 and where part is applicable.

• Oven Burner Set
• Steel tubes
• Left & Right
• 6-1/4" x 30"
• Orifice 9/16" hole
• With air shutter
• 3" plate
• (no longer comes with welded on front pilot bracket)
• Commonly used on various BLODGETT models such as:  1000, 1060  (Prior to 8/1986), 999 and where part is applicable.

• Panel Assembly Deflector Side
• Overall Dimensions are 35-1/2" x 14-7/8"
• Commonly used on various BLODGETT models such as:  999, 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, ( if converted from a 2 piece to a 3 piece oven), 1060 and where part is applicable.

• Control Panel Assembly
• Commonly used on various BLODGETT models such as:  1048, 1060 and where part is applicable.

• Louvered Front Access Panel
• Commonly used on various BLODGETT models such as:  1048, 1060 and where part is applicable.

• Pilot Burner
• Nat/LP gas
• 3/16" & 1/4" CCT
• (Used with FMEA Safety)
• Use orifice PD114514  for LP gas
• Use orifice PD114513 for Natural gas
• Commonly used on various BLODGETT models such as:  90-M, 1000, 1048, 1060, 999, BCG, FA100, FA200, FA300, FA SERIES, GZL-10, GZL SERIES and where part is applicable.

• Orifice LP
• S/S
• Size 0.010"
• Tube Size 3/16"
• Commonly used on various BLODGETT models such as: 1000, 1048, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, FA100, FA200, FA300, FA SERIES, GZL-10, GZL SERIES, L900, S900 and where part is applicable.

• Pilot Shield
• Commonly used on various BLODGETT models such as:  1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060 and where part is applicable.

• Hinge Pin and Screw
• Commonly used on various BLODGETT models such as:  1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, L900, S900, KCO-25E, CTB and where part is applicable.

• Commonly used on various BLODGETT models such as: 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060 and where part is applicable.

• Pin
• 1/4 x 1-1/8 Spiral
• Commonly used on various BLODGETT models such as:  1000, 1048, , 1060, 999, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1048DD and where part is applicable.

• Commonly used on various Blodgett models such as: 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, AC-500 XCEL, BC14G, BC20G, BCS-8G, CNV-8G, CNV14G, COS-8G, COS-8GDS, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, L900, S900, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• Gas Pressure Regulator
• 3/4" in/out
• 3-6" WC
• 1/2 PSI
• 250,000 BTU
• Natural gas
• Come with  90 degree elbow
• Commonly used on various BLODGETT models such as:  1000, 1048, 1060, 900, 901, 911, 916, 931, 951, 961, 966, 981, 999, BCG, FA100, FA200, FA300, FA SERIES, GZL-10, GZL SERIES and where part is applicable.

• Pressure Regulator
• 1/2" Pipe
• Natural Gas
• 1/2 PSIG
• 5.5"- 12" WC
• Commonly Used on various BLODGETT models such as: 901, 911, 916, 931, 951, 961, 966, 981, 900 SERIES, 999, 1000, 1048, 1060, BCG, DFG-100, DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3, DFG-200, FA SERIES, FA100, FA200, FA300, GZL-10, GZL SERIES and where part is applicable.

• Pressure Regulator
• Commonly used on various BLODGETT models such as:  1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, L900, S900 and where part is applicable.

• Gas Regulator
• LP gas
• WITH BUSHING
• 3/4" FPT Gas in/out
• 5.5" - 12" Water Column 
• Commonly used on various BLODGETT models such as:  1000,  999, BCG, FA100, FA200, FA300, FA SERIES, GZL-10, GZL SERIES and where part is applicable.

• Retainer Ring
• Internal snap ring
• Commonly used on various Blodgett models such as 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 1200, 999 and where part is applicable

• High Temp Safety Gas Valve
• 1/2 NPT
• 3/16" CCT pilot, 3-1/2" width, pilot out only K type
• Has blue gasket for high temp oven series 900. The early units were updated and units made after Jan 25, 2009.
• To convert 1/4 CCT pilot to 3/16 CCT tubing use item number PD114154. See additional accessories on this page for other conversion requirements.
• Commonly used on various Blodgett models such as 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981 and where part is applicable.

• Baking Door Seal
• Crumb catcher
• 44-1/2"
• Stainless Steel
• 2 square holes
• Commonly used on various BLODGETT models such as: 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1060 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 1200, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, L900, S900 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1048, 1060 and where part is applicable.

• Door Spring - Helper
• 6-3/4 x 1-1/4"
• 4-3/8" coil length
• 33 coils
• Commonly used on various BLODGETT models such as: 1048, 1048DD, 1060 and where part is applicable.

• Leg Set of 4 
• Stainless Steel 12"
• Commonly used on various BLODGETT models such as: 1000, 1048, 1060, 999, 1048B, 1048B-CE, 1048BL, 1048BL-CE where part is applicable.  

• Commonly used on various BLODGETT models such as: 1060 and where part is applicable.

• Thermocouple
• 1980 Series
• Length 48"
• Snap-Fit
• 20-30 Millivolt
• (Used on Blodgett series 900 early units that have been updated and for units made after 1-25-2009.)
• Used on various Blodgett models such as 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, 1000, 1048, 1060, L900, S900 and where part is applicable.  

NOTE: This thermocouple is not a replacement on a FM Safety Valve.

• Thermocouple
• 60"
• The K16 Series are heavy-duty, high performance thermocouples that provide high output for residential, commercial, and industrial applications.
• Comes with adapters
• Nickel plated
• Used on various Blodgett models such as 1048, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999 and where part is applicable. 

• Thermostat
• FDH-2
• 300-650°F
• Gas In/Out 1/2" NPT
• 3/16 x 14-3/4 bulb
• 48" capillary
• 1/2" FPT
• Comes with knob
• Commonly used on various Blodgett models such as: 100M, 1000, 1048, 1060, 90M and where part is applicable.

NOTE: If you have Model 999, you will need Part Number PD10983.

• Commonly used on various BLODGETT models such as: 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 999 and where part is applicable.

Blodgett TRIM ASSY, 1060 BOTTOM S/S, PD176930

• Commonly used on various BLODGETT models such as: 1048, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 999, AC-500, BCS-8G, CNV-8G, COS-8G, COS-8GDS, DFG-50, DFG-50 POPEYES and where part is applicable.

• Commonly used on various BLODGETT models such as: 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1048DD, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, AC-500, BCS-8G, CNV-8G, COS-20G, COS-8G, COS-8GDS, L900, S900 and where part is applicable.

• Gas Valve
• Shut off
• Manual
• 1/2" In/Out
• with Chrome Handle
• Commonly used on various BLODGETT models such as:  1000, 1048, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, DFG-100, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V and where part is applicable.

• Pilot valve
• Commonly used on Blodgett models such as: 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, L900, S900 and where part is applicable.

• TS11 Safety Valve
• 1/4" Pilot CCT Out Only
• 1/2" NPT Gas In/Out
• High heat blue gasket model
• Commonly used on Blodgett models such as 1048, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 1060C and where part is applicable.

• Safety Valve Upgrade Kit
• For units between March 1969 and Jan 25, 2009
• Kit includes:
• • TS11K safety
  • Thermocouple 48"
  • 3/16 x 40" pilot tubing
  • Natural gas pilot assembly
  • Pilot mounting bracket
  • LP gas pilot orifice and control panel
  • 1/2 x 1/2 Brass extension for 900 convert 1/4 CCT pilot to 3/16 pilot
• Used on various Blodgett models such as: 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, L900, S900 and where part is applicable.  
  • 900 series deck ovens (Except the 999 Deck Oven) 

• Upgrade Valve Kit
• TS11K safety retro
• Inlet 1/2 NPT
• Outlet 1/2 NPT
• Natural or LP gas
• Includes pilot assembly, pilot tubing, thermocouple, cover panel.
• Use for Blodgett: models 1048 and 1060 deck ovens only.