Catalog Advanced Search

• Lamp
• 120V
• 50 Watt
• Traditional oven lamp
• Commonly used on various BLODGETT models such as: 1000, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, L900, S900, 999, DFG-100, DFG-100 XCEL, DFG-200, EF SERIES, EZE SERIES, FA SERIES,  FA100, FA200, FA300,GZL SERIES, GZL-10, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Vented access panel
• Used on various Blodgett models such as: DFG-100, DFG-200, SHO, SHO SERIES, SHO-100G, SHO-G, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G  and where part is applicable.

• Round Signal Indicator
• Amber Light
• Flat top
• 125 Volts
• 1/3 Watt
• 1/2" Diameter
• 3/16" Tab Terminals
• Commonly used on Blodgett models such as BP-100, BP-50, DFG-100, DFG-200, DFG-50 and where part is applicable

• Signal Light - Hold
• Amber
• Round
• 250V
• 1/3W
• Mount size 1/2"
• Terminal size 3/16"
• Commonly used on various BLODGETT models such as: BP-100, BP-50, CTB, CTBR (with Cook/Hold, Pulse Plus), CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, DFG-50 POPEYES, MARK V (with Pulse Plus), MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200G and where part is applicable.  

• Arm and Hardware
• LH Door
• Commonly used on various BLODGETT models such as: DFG-100, DFG-100 XCEL, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 100G ES, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

•  TIMER ASSY, REPEAT CYCLE 120V
• Commonly Use on various BLODGETT models: DFG-100, DFG-200, DFG-50 and where part is applicable

• Axial Fan
• 120V
• 30 CFM
• 3300 RPM
• 3-1/8 x 1-1/2" CCT 
• Commonly used on various BLODGETT models such as: 1048DD, AC-500, DFG-100, DFG-200, DFG-300, MT3255, MT3255-CE, MT3255E, MT3270, MT3270-CE, MT3255G, MT3270E, ST-300 AA, ST-300 AB, SHO, SHO SERIES, ZEPHAIRE G (with Solid State Controls), ZEPHAIRE G PLUS, ZEPHAIRE 200G and where part is applicable.

• Axial Fan
• 230V
• 2900 RPM
• 102 CFM
• 4-11/16 x 1-1/2"
• 4-1/8" hole centers
• CW
• No wire leads
• Commonly used on Blodgett models such as: B14G, BC-20E, BC-20G, BC14G SERIES, BCS-6, BCS-8DS, BCS-8E, BP-100, BP-50, CNV-8E, COS-101, COS-101NSF, COS-101S, COS-101SNSF, COS-20NSF, COS-5H, COS-5HA, COS-6, COS-6NSF, COS-8E, COS-8EDS, CTB, CTB POPEYES, CTB Series, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB1, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MT2136E, MT2136G, MT3240E, MT3240G, MT3255G, MT3270E, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Axial Fan
• 240V
• 10W
• 3-1/8 x 1-1/2"
• 2-13/16" center holes
• 34 CFM
• 3300 RPM
• Wire leads
• Clockwise rotation
• Commonly used on various BLODGETT models such as: 1200, 1201, 1214, 1400, 1405, 1415, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, KCO-25E, LTO SERIES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD, MT3255G, MT3270E, ZEPHAIRE 50E, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Back Sheet
• Stainless Steel
• Outside
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Backsheet Kit
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, ZEPHAIRE 240 G PLUS, ZEPHAIRE 100 G and where part is applicable.

• Door Catch, Ball Plunger
• 5/8 x 11 x 1"
• Outer diameter is 1"
• Inside diameter is 5/8"
• Material steel
• Commonly Used on various BLODGETT models such as: DFG-100, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, RE SERIES, CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP, WPB WARMER and where part is applicable.

• Knob W/Pointer
• Black
• Buzzer style  
• Commonly used on various BLODGETT models such as:  1200, 1201, 1214, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, LTO SERIES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Blower Wheel
• 10-3/4 diameter
• 2-1/8" W
• 5/8" hole
• Flat back in middle
• Double wheel configuration
• CCW rotation
• Puller hub keyway with keyway slot
• Used on various Blodgett models such as: DFG-100, DFG-100 XCEL, DFG-200, SHO-100G, SHO, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• 10-3/4" diameter x 2-1/8" Wide
• 5/8" hole size
• CW rotation
• Comes with key way 
• Commonly used on various BLODGETT models such as: DFG-100, DFG-100 XCEL, DFG-200, SHO-G, SHO SERIES, SHO-100G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• Commonly Used on various BLODGETT models such as: CTB, CTB XCEL, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR XCEL, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V-100, MARK V-200, MARK V SERIES and where part is applicable.

• Temperature Controller
• Solid State
• 200-500° F
• Cook Only
• Older units have ground connection #11 which is not needed on this board.
• Commonly used on various BLODGETT models such as:  1400, 1405, 1415, AC-500, AC-500 XCEL, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB-SERIES, CTB1, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-200, DFG-300, DFG-50, DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3, KCO-25E, MARK V, MARK V SERIES, MARK V KFC, MARK V-100, MARK V-200, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.
• Units with no hold timer and reach 500°F Max; KCO-25E; Series: CTB & CTBR; DFG 50, 100, 200 &300; Mark V; Use, 18227 Old 

• For units before 7/1984
• Mechanical cook only, hot surface ignition 1 SP
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• With pin
• Commonly Used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Oven Door Glass Bracket (Sold Individually)
• Commonly used on various BLODGETT models such as: DFG-50, DFG-100, DFG-200, DFG-300 (Before 1/24/83), EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10 (After 6/76) and where part is applicable.

• Washers for Door
• Bronze
• .625 ID x .122 thick
• Set of 2
• For models: DFG & MARK V (after Jan. 1983)
• Commonly used on various BLODGETT models such as:  CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, DFG-50 POPEYES, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-200, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• 23-3/4 x 6"
• Used on various Blodgett models such as DFG-100, DFG-200, SHO-100G, SHO, SHO SERIES, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable. 

• Door Hinge Bushing (2/Pkg)
• Brass
• 5/8" ID x 7/8" OD
• Used on various Blodgett models such as AC-500, BDO-100G-ES, BDO-G, CTB, CTB POPEYES, CTB XCEL, CTB SERIES, CTB WENDYS, CTB-AP, CTBR, CTBR XCEL, CTBR POPEYES, CTBR-AP, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, DFG-50 POPEYES, DFG-100-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100 XCEL, MARK V XCEL SERIES, MARK V-IIIH, MARK V-IIIHD, SHO SERIES, SHO-E, SHO-G, SHO-100E, SHO-100G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 100G ES, ZEPHAIREG PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G, CTB1, CTB2, CTBR1, DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3 and where part is applicable. 

• Buzzer - 120V
• With terminals
• Commonly used on various BLODGETT models such as: 1200, 1201, 1214, AC-500, BDO-100G ES, BDO-G, BP-100, BP-50, DFG-100, DFG-100-ES, DFG-200, DFG-200-ES, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MT1828E, MT1828G, MT3240E, MT3240G, MT3255G, MT3270E, MT3855G, MT3870, SHO-100G, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240G PLUS, ZEPHAIRE E (w/Mechanical Controls), ZEPHAIRE G (w/Mechanical & w/Solid State Controls), ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• Buzzer w/Bracket
• 240V Coil
• 2 terminals, 2 each 3/16" insulated F push-on
• Commonly used on various BLODGETT models such as: 1200, 1201, 1214, 1400, 1405, 1415, AC-500, BC-20G, BC14G OLD, BC20G, BP-100, BP-50, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3270E, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE, RE SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 50E, ZEPHAIRE 100E, ZEPHAIRE E, ZEPHAIRE 200E and where part is applicable.
• For models COS-5HD, COS-5HS, with serial # HU & HY

• Buzzer
• Continuous duty
• 120V
• 1/4" mail tab terminals
• Commonly used on various BLODGETT models such as: 1200, AC-500, BP-100, BP-50, DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MT1828E, MT1828G, MT3240E, MT3240G, MT3255G, MT3270E, MT3855G, MT3870, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• Capacitor, suppressor
• Commonly used on various BLODGETT models such as: COS-6AA, BCS-6, COS-101, COS-101S, COS-201NSF, COS-201NSF, COS-20, COS-20E, COS-20NSF, COS-6, COS-6NSF and where part is applicable.

• Capacitor Assembly, Snubber
• Used on various Blodgett models such as AC-500, DFG-100, DFG-200, DFG-50, DFG-50 POPEYES and where part is applicable.

• Capacitor
• External mount
• 370V
• 10.0 Microns
• For 2 Speed Motors
• 8 Tab Terminals 1/4"
• 4" x 1-3/4" x 1-1/2"
• Commonly used on various Blodgett models such as DFG-100 XCEL, DFG-100, DFG-200, SHO, SHO-100G, SHO-G, SHO SERIES, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.   

• Caster W/O Brake Old Style
• 5" Diameter Poly Wheel
• 1-1/4" Tread Width
• 3/4-14NPT Threaded Stem
• .63" High  

• Caster W/Brake Old Style
• 5" Diameter Poly Wheel
• 1-1/4" Tread Width
• 3/4-14NPT Threaded Stem
• .63" High 
• Used on various Blodgett models such as DFG100 and where part is applicable. Use for old style light duty models. 

• Swivel Stem Caster with Brake
• Expands up to 1-1/2"
• 5" wheel diameter
• 6-1/4" load height
• Color gray
• Max Load Capacity Per Wheel 300 lbs
• Tread Width 1-1/4"
• Commonly used on Blodgett models such as (Non-Stacked Units): AC-500, AC-500 XCEL, B14G, BC14G Series, BDO-100G-ES, BDO-G, CTB, CTB Popeyes, CTB Series, CTB Wendy's, CTB-AP, CTBR, CTBR Popeyes, CTB XCEL, CTBR-AP, CTBR XCEL, DFG-50, DFG-50 Popeyes, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, EF Series, EF-111, EZE Series, FA Series, FA100, FA200, FA300, GZL Series, GZL-10, HV-100E, HV-100G, Mark V, Mark V KFC, Mark V-100, Mark V-100 XCEL, Mark V-200, Mark V Series, Mark V XCEL Series, Mark V-IIIH, Mark V-IIIHD, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, Zephaire 240E PLUS, Zephaire 240G PLUS, Zephaire 50E, Zephaire E, Zephaire G, Zephaire G PLUS, Zephaire 100E, Zephaire 100G, Zephaire 200E, Zephaire 200G and where part is applicable.

• Swivel Stem Type Caster Without Brake
• 5" wheel diameter
• 6-1//4" load height
• Color gray
• Max Load Capacity Per Wheel 300
• Tread Width 1-1/4"
• Expands up to 1-1/2"
• Commonly used on Blodgett models such as AC-500, AC-500 XCEL, B14G, BC14G Series, BDO-100G-ES, BDO-G, CTB, CTB Popeyes, CTB Series, CTB Wendy's, CTB-AP, CTBR, CTBR Popeyes, CTB XCEL, CTBR-AP, CTBR XCEL, DFG-50, DFG-50 Popeyes, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, EF Series, EF-111, EZE Series, FA Series, FA100, FA200, FA300, GZL Series, GZL-10, HV-100E, HV-100G, Mark V, Mark V KFC, Mark V-100, Mark V-100 XCEL, Mark V-200, Mark V Series, Mark V XCEL Series, Mark V-IIIH, Mark V-IIIHD, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, Zephaire 240E Plus, Zephaire 240G Plus, Zephaire 50E, Zephaire E, Zephaire G, Zephaire G Plus, Zephaire 100E, Zephaire 100G, Zephaire 200E, Zephaire 200G and where part is applicable.

• Caster Set of 4x  
• Standard Duty
• Plated
• Wheel size is 3" diameter
• Tread width is 1-3/4"
• Low Profile, Double Oven 
• Two With Brake
• Two Without Brake
• Commonly used on Blodgett models such as 1048DD, AC-500, AC-500 XCEL, BDO-100G-ES, BDO-G, BP-100, BP-50, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Caster Set
• Heavy duty
• Low profile
• Set of 4
• Two With Brake
• Two Without Brake
• Commonly used on Blodgett models such as AC-500 XCEL, DFG-100, DFG-100 XCEL, DFG-200, HV-100E, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO, SHO-100E, SHO-E, ZEPHAIRE E, ZEPHAIRE E PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Control Kit
• CH-PRO3
• CH controller
• Digital
• 14 button
• Commonly used on Blodgett models: AC-500, AC-500 XCEL, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, DFG-50 POPEYES, MARK V XCEL, MARK V XCEL SERIES, MARK V-100 XCEL and where part is applicable.

• Control Panel with Decal
• Commonly Used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Digital Temp Controller
• Solid State
• 120/240VAC
• 1PH
• 50/60HZ
• 150-500 degrees F
• Commonly used on Blodgett models such as: AC-500, AC-500 XCEL, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 200E, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.  

• Temp Controller
• Solid State  
• 3" x 2-1/2" x 1-3/4"
• 200-500 degrees F
• Commonly used on Blodgett models such as BDO-100G-ES, BDO-G, COS-20G, DFG-100, DFG-200, Mark V, Mark V KFC, Mark V Series, Mark V-100, Mark V-200, SHI-E, SHI-G, SHO-E, SHO-G, SHO-100E, SHO-100G, ST-300 AA, ST-300 AB, Zephaire 240E Plus, Zephaire 240G Plus, Zephaire 50E, Zephaire E, Zephaire G, Zephaire G Plus, Zephaire 100E, Zephaire 100G, Zephaire 200E, Zephaire 200G and where part is applicable.
• Oven ST-300, Zephaire 50E, Zephaire E & G with solid state control.

• Conversion Kit
• LP to Natural gas
• No Safety Valve
• Commonly used on Blodgett models such as: DFG-100, DFG-200, DFG-300, Zephaire G and where part is applicable.

• Conversion Kit
• LP to Natural gas
• 1/2" FPT
• With safety valve
• 1/2" FPT in and out
• Pilot out only 3/16" CCT
• 150,000 BTU
• 24V
• Commonly used on Blodgett models such as: DFG-100, DFG-200, DFG-300, Zephaire G which use 24V and where part is applicable.

• LP to Natural gas conversion
  • valve regulator spring LP to Natural
  • natural pilot orfice
  • burner orifice, qt 2
• After 7-12-1993
• #38 MTD
• Use with Johnson ignitor and Honeywell 24V gas valve
• Commonly used on various BLODGETT models such as:  DFG-200, DFG-100, DFG-50 and where part is applicable.

• Conversion Kit
• Natural to LP Gas
• 1/16 MTD
• Used on various Blodgett models such as DFG-50, DFG-100 and where part is applicable.

• Conversion Kit
• LP to Natural gas
• Includes
  • spring
  • pilot orifice
  • 2 x burner orifice
• Must verify serial number before ordering
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.

• Louvered cover panel with decal
• 38" x 6-1/2" x 3-3/4"
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, SHO SERIES, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE 100G and where part is applicable.

• Commonly Used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Cover, Lamp Interior S/S
• Commonly used on Blodgett models such as DFG-100, DFG-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: BP-100, COS-5H, COS-5HA, COS-5HB, DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ST-300 AA, ST-300 AB, WPB WARMER, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-100 XCEL, DFG-200, MARK V, MARK V SERIES, MARK V KFC, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.

• Control Decal
• 2 speed models
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-100 XCEL, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-100 XCEL, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Commonly Used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

Blodgett DECAL, PULSE PLUS DFG-100/200, PD172442

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Deflector Assembly and Support
• 27 x 19" x 2" deflector
• 21-3/4 support
• Use for Blodgett Series: DFG-100, DFG-200, DFG-300 (Before 7/84) and where part is applicable.

• Conversion Kit
• For natural gas
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Conversion Kit IID-3, Propane
• Commonly used on various Blodgett models such as DFG-100, DFG-200 and where part is applicable.

• Dial Mode (Knob)
• Round with white pointer line
• Timer, Temperature, mode selector
• Black plastic
• 1-1/4" hole with 2 set screws
• Commonly used on various BLODGETT models such as: 1200, 1201, 1214, AC-500, AC-500 XCEL, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB1, CTB-AP, CTBR-AP, CTBR, CTBR POPEYES, DFG-100, DFG-200, DFG-50, DFG-50 POPEYES,  MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD, ST-300 AA, ST-300 AB and where part is applicable.

• Dial only
• Hold thermostat 
• 100-200 degrees F
• Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as:  DFG-100, DFG-100 XCEL, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, SHO SERIES, SHO-G, SHO-100G, ST-300 AA, ST-300 AB, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.
  

• Docking Assembly
• with hardware
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, RE SERIES, ZEPHAIRE G and where part is applicable.
  

• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, EF-111, EF SERIES, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS and where part is applicable.
  

• Support Assembly
• Use for lower door
• Comes with micro switch
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES,  MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.
• Must provide model and serial number at checkout to confirm accuracy of part. If information not provided, then the part is Non-Returnable.

• Door Switch Assembly
• Micro
• Push button w roller
• Fits hole 2 holes
• 1" centers
• N.O.
• SPST
• Stem has double flats
• 3/4HP - 125V
• 1.5HP - 250V
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 (after 07/81), DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V (between 7/84 and 8/31/2000), MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ST-300 AA, ST-300 AB, ZEPHAIRE E, ZEPHAIRE G (before 8/31/2000) and where part is applicable.

• Retrofit Kit (This kit is not to be used on hatch-able ovens and hatch-able deep ovens)
• Push button with roller
• Fits hole 2 holes 1" centers
• Normally open
• SPST
• Stem has double flats
• (M) on/off
• 2 terminals
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 (after 7/2000), MARK V (between 7/1984 and 8/31/2000), MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G (before 8/31/2000), ZEPHAIREG PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Backpipe Kit
• Double stack oven
• Overall Length is 34"
• Commonly used on various BLODGETT models such as:  BDO-100G-ES, BDO-G, DFG-100-ES, DFG-100, DFG-100 XCEL, DFG-200, DFG-200-ES, SHO SERIES, SHO-100G, SHO-G,  SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 100G ES, ZEPHAIRE 200G and where part is applicable.

• Draft Converter
• Stainless steel
• Canopy vent 
• Commonly used on various BLODGETT models such as:  1000, 1048DD, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, AC-500, AC-500 XCEL, DFG-100, DFG-100 XCEL, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, L900, MARK V XCEL SERIES, MARK V XCEL, MARK V-100 XCEL, S900, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• Drafthood
• Direct Vent
• 16" length x 12" width x 7" height
• 6" round connection 
• Metal
• Use on Blodgett models such as 1048DD, 1000, 900, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, AC-500, AC-500 XCEL, DFG-100, DFG-100 XCEL, DFG-200, EF Series, EF-111, EZE Series, L900, S900, SHO Series, SHO-100G, SHO-G, ST-300 AA, ST-300 AB, Zephaire 240G PLUS, Zephaire G, Zephaire G Plus, Zephaire 100G, Zephaire 200G and where part is applicable.

• Dual Gas Solenoid
• Baso
• Natural gas
• 120V
• Gas In/Out: 1/2 NPT
• Pilot Out Only: 1/8 NPT
• Commonly used on various Blodegtt and Middleby Marshall models such as:  DFG-100, DFG-200, DFG-300 (Prior to 2/1/86) , DFG-50 (Prior to 4/1/86) and where part is applicable.

• Dual Solenoid Gas Valve
• LP Gas
• 120V
• Gas in/out 1/2" (FPT)
• 179,000 BTU
• 4-1/4" wide
• 1/4" male tabs (4)
• Pilot out 1/8" FPT
• BASO
• Used on various Blodgett models such as DFG-50, DFG-100, DFG-200, DFG-300 and where part is applicable.

(Note: used on DFG50 models before April 1986. Used on models DFG100-200-300 series before February 1986.) Call to ensure accuracy or provide model and serial number in comment box at checkout and we will confirm. Otherwise valve is non-returnable.)

• Elbow Union
• Female
• 1/2" IPS
• Commonly used on various BLODGETT models such as: 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, BCS-8G, CNV-8G, COS-8G, DFG-100, DFG-200, DFG-50, DFG-50 POPEYES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, SHO-G and where part is applicable.

• Axial Fan
• Low velocity
• 115V
• For Units built after 8/90 
• 4-1/8"  Mounting Centers
• Commonly used on various BLODGETT models such as: AC-500 XCEL, BCS-8G, BDO-G, CNV-8G, COS-8G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-50, DFG-50 POPEYES, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 100G ES,  ZEPHAIRE 200G and where part is applicable.

• Filter and Literature
• Commonly used on various BLODGETT models such as:  CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-200, DFG-100, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Ignition Wire Assembly
• White or Orange
• 36"
• Commonly used on various Blodgett models such as:  BDO-100G-ES, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, DFG-50 POPEYES, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE, ZEPHAIRE 100G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Flue Box Assembly
• For Single Oven
• 24" x 4-3/16"x 4-5/8"
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G and where part is applicable.
  

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, ST-300 AA, ST-300 AB, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Fuse
• 250V
• 5 AMP
• 1/4" x 1/4"
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, DFG-50, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10 and where part is applicable.

• Gas Safety Valve
• Honeywell
• 230/240v
• 50hz
• 3/4" FPT 
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, DFG-50, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200G and where part is applicable.

THIS PART IS FOR EXPORT/CE MODELS ONLY

• Gas Solenoid 120V
• Natural or LP gas
• Gas In/Out: 1/2" NPT
• 3" width
• 1/8" pressure tap on bottom of valve
• Commonly used on various BLODGETT models such as:  B48D-GGGG, DFG-100, DFG-200, DFG-300 (Prior to 7/84), FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MG-32, MG3270, MT3255, MT3255-CE, MT3255E, MT2136G, MT3255G, MT3270E, MT3270, MT3270-CE and where part is applicable.

• Manual gas valve without handle (see accessories to the right for add-on items)
• On/Off
• 1/2 inch x 1/2 inch
• Commonly used on various BLODGETT models such as:  901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, L900, S900, 1000, 1048, 1060, 1048B, 1048B-CE, 1048BL, 1048BL-CE, ST-300 AA, ST-300 AB, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, DFG-100, MARK V and where part is applicable.

• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.
  

• Stainless Steel Kit
• This is a set for one door
• 4 pieces
• With all screws
• Stainless Steel
• 29-1/4"
• 23" 
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-100 XCEL, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100 XCEL, MARK V-100, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as:  CTB, CTB POPEYES, CTB SERIES, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, MARK V, MARK V KFC, MARK V XCEL SERIES, MARK V-100 XCEL and where part is applicable.
  

• Perimeter Gasket Set
• AFTER July 1984
• Metal, SS
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ST-300 AA, ST-300 AB, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Perimeter Door Gasket Set
• 4 pieces
• Stainless steel
• With screws
• Commonly used on various Blodgett models such as: DFG-100, DFG-200, EZE SERIES, EF SERIES, EF-111, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10 and where part is applicable.

• Thermocouple Gasket
• Commonly used on various Blodgett models such as:  CNV-8E, CNV-8G, COS-20E, COS-5H, COS-5HA, COS-5HB, COS-6, COS-8E, COS-8EDS, COS-8G, COS-8GDS and where part is applicable.
  

• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, DFG-50, DFG-50 POPEYES, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.
  

• Oven Door, Glass
• 14-1/4"W x 20-1/2"H x 1-5/16"T
• Brackets not included
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, DFG-300 (Before 1/24/83), DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10 (After 6/76) and where part is applicable.
  

• Oven Door Glass 14-1/4"W x 20-1/2"H x 1-5/16"T
• Brackets not included
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, DFG-300 (Before 1/24/83), DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10 (After 6/76) and where part is applicable.
  

• Oven Door Glass
• Includes Installation Tool
• 10-1/8"W x 17-1/8"H x 1-3/4"T
• Commonly used on various BLODGETT models such as: AC-500 XCEL, BDO-100-G-ES, BDO-G, CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-50, DFG-200, DFG-300 (1/24/83 & After),  DFG-100 XCEL, DFG-100-ES, DFG-200-ES, DFG-50 POPEYES, EF SERIES, EF-111, EZE SERIES, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: BDO-100G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-200, LTO SERIES, MARK V XCEL SERIES, MARK V-100 XCEL, ZEPHAIRE 100G ES and where part is applicable.
  

• Commonly used on various BLODGETT models such as:  BC14G, CNV14G, COS-5H, COS-5HB, DFG-100, DFG-200, HV-100E, MARK V-IIIH, MARK V-IIIHD and where part is applicable.
  

• Commonly used on various BLODGETT models such as:  BDO-100G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-200, DFG-100-ES, MARK V-100 XCEL, MARK V XCEL SERIES, MARK V-100 XCEL, MT1820E, MT1828E, MT1828E-CE, MT1828G, MT1828G-CE, ZEPHAIRE 100G ES and where part is applicable.
  

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10 and where part is applicable.

• Commonly used on various BLODGETT models such as:  DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.
  

• Door Handle
• 22-1/2"
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES (after 6-1984), MARK V-100, MARK V-100 XCEL, MARK V-200, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, RE SERIES, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.
  

• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.
  

• Harness, rear connecting 2 SP
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.
  

• Commonly Used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Commonly used on various BLODGETT models such as:  CTB, CTB POPEYES, CTB SERIES, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES and where part is applicable.
  

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.
  

• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.
  

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-100 XCEL and where part is applicable.
  

• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.
  

• Hi-Limit Switch Kit
• Commonly used on various Blodgett models such as CTB, CTB-AP, CTB Series, CTB1, CTBR-AP, DFG-100, DFG-200, DFG-50, Mark V KFC, Mark V Series, Mark V-100, Mark V-200, MT2136E-AB, MT2136E-CE, MT2136G-AB, MT2136G-CE, MT3255-CE, MT3255E, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870-CE, MT1828E, MT1828G, MT2136E, MT2136G, MT3240E, MT3240G, MT3255G, MT3270E, MT3855G, MT3870, Zephaire E, Zephaire G, Zephaire G PLUS, Zephaire 200E, Zephaire 200G and where part is applicable.

• Flex Hose
• 15" x 1/2"
• Commonly used on various BLODGETT models such as: AC-500 XCEL, DFG-100, DFG-100 XCEL, DFG-200, HV-100G, SHO-G, SHO SERIES, SHO-100G, ZEPHAIRE 240G PLUS, ZEPHAIRE 100G and where part is applicable.

• Ignitor
• Electric
• 2-3/4" long
• 15" wire leads
• 1 lead has a female push on, the other wire is bare.
• Commonly used on Blodgett models such as DFG-100, DFG-200 and where part is applicable

• Conversion IQ2 kit into DFG-100, DFG-200
• 2 speed
• We must verify your serial number and voltage to confirm retro fit.
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.
• If ordered without serial number, item cannot be returned.

• K Thermostat
• 120-200°F
• Bulb 1/4 x 13"
• Commonly Use on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Open Stand Kit
• 25"
• w/rack guide
• Commonly used on various BLODGETT models such as: DFG-100, DFG-100 XCEL, DFG-200, EF SERIES, EF-111, FA SERIES, FA100, FA200, FA300, EZE SERIES, GZL SERIES, GZL-10, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G and where part is applicable.

• Commonly used on various BLODGETT models such as: BP-100, BP-50, DFG-100, DFG-100 XCEL, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Digital TIMER and infinite kit
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.  

• Knob (For Thermostat) 
• 200-500 F
• Commonly used on various BLODGETT models such as:  CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, SHO-G, SHO SERIES, SHO-E, SHO-100E, SHO-100G, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE E PLUS, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Knob (For Thermostat, Timers & Mode Selectors)
• Single pointer line.
• Commonly used on various BLODGETT models such as:  1400, 1405, 1415, BCS-6, BCS-8DS, BCS-8E, BCS-8G, BDO-100-G-ES, CNV-8E, CNV-8G, COS-101, COS-101S, COS-20E, COS-20G, COS-5H, COS-5HA, COS-5HB, COS-6, COS-8E, COS-8EDS, COS-8G, COS-8GDS, CTB, CTB Popeyes, CTB Series, CTB Wendy's, CTB-AP, CTB1, CTBR, CTBR Popeyes, CTBR-AP, DFG-100, DFG-200, DFG-50, DFG-50 Popeyes, FA Series, FA100, FA200, FA300, GZL Series, GZL-10, Mark V, Mark V KFC, Mark V Series, Mark V-100, Mark V-200, Mark V-III, Mark V-IIIH, Mark V-IIIHD, SHI Series, SHI-E, SHI-G, SHO Series, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, Top 25, Zephaire 240E Plus, Zephaire 240G Plus, Zephaire 50E, Zephaire E, Zephaire G, Zephaire E Plus, Zephaire G Plus, Zephaire 100E, Zephaire 100G, Zephaire 200E, Zephaire 200G, Zephaire 100G ES (with Solid State Controls) and where part is applicable.

• Black Knob
• Set Screw Mount
• Commonly used on various BLODGETT models such as:  AC-500, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50,MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD, ST-300 AA, ST-300 AB and where part is applicable.

• Commonly Used on various BLODGETT models such as: AC-500 XCEL, BC-20E, BC-20G, BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, CTB-G, CTB-GFB, CTBR-G, CTBR-GFB, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, HV-100E, HV-100G, HV-50E, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1400, 1405, 1415, AC-500 XCEL, BC-20E, BC-20G, BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, DFG100, HV-100E, HV-100G, HV-50E, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, XR8E, XR8G and where part is applicable.

• Knob
• Black and Silver with indicator line
• 3/4" diameter
• 3/16" D stem
• Commonly used on various BLODGETT models such as: 1400, 1405, 1415, AC-500, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD and where part is applicable.

• Lamp
• 40 Watt
• 230V
• Shatter Proof
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-100G, SHO-G and where part is applicable.

• Door assembly
• With glass
• Left hand door
• Commonly used on various BLODGETT models such as:  BDO-100G-ES, BDO-G, DFG-100, DFG-100-ES, DFG-200, DFG-200-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO-E, SHO-G, SHO-100E, SHO-100G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G, ZEPHAIRE 100G ES and where part is applicable.  

Doors are not returnable per the factory. If not sure, call us to review before ordering. Have model and serial number ready.

• Commonly used on various BLODGETT models such as: BCS-6, BCX-14, BCX-14E, BCX-14G, BDO-100G-ES, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, COS-6, CTB, DFG-100, DFG-100 XCEL, DFG-200, DFG-100-ES, HV-100E, HV-100G, MARK V XCEL SERIES, SHO-E, SHO-G, SHO-100E, SHO-100G, ZEPHAIRE 100G ES and where part is applicable.

• Leg Studs
• Set of 4
• Commonly used on various BLODGETT models such as: AC-500, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10,MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Leg Set
• Qty 4
• W/ Feet
• Stainless Steel
• Commonly used on various BLODGETT models such as: B14G, BC14G SERIES, BCS-6, BCS-8E, BCS-8G, BCX-14E, BCX-14G, BP-100, BP-50, BX-14E, BX-14G, CNV-8E, CNV-8G, CNVX-14E, CNVX-14G, COS-6, COS-8E, COS-8EDS, COS-8G, COS-8GDS, DFG-100, DFG-100 XCEL, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, HV-100E, HV-100G, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, RE SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, WPB WARMER, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 100G ES, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Oven Legs
• Set of 4
• 25"
• Stainless Steel
• Commonly used on Blodgett models such as AC-500, BDO-100G-ES, BDO-G, BP-100, BP-50, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, HV-100E, HV-100G, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, WPB WARMER, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200,  MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• Signal Light
• Red
• Round
• 28V
• 1/3 watt
• Mount size 1/2" 
• Terminal size 3/16
• Commonly used on various BLODGETT models such as: AC-500, AC-500 XCEL, BDO-100G-ES, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-50,MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3270E, MT3855G, MT3855G-CE, MT3855G-G, MT3870, MT3870-CE, SHO SERIES, SHO-100G, SHO-G, ST-300 AA, ST-300 AB, XCEL-50EC, ZEPHAIRE 240G PLUS, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G, ZEPHAIRE 100G ES, ZEPHAIRE E, ZEPHAIRE G (with Solid State Controls), and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE 100G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Liner Bottom
• Stainless steel
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Liner Bottom
• Stainless steel
• Commonly used on various BLODGETT models such as: DFG-100, MARK V, MARK V SERIES, MARK V-IIIH, MARK V-IIIHD and where part is applicable.
  

• Pressure Lock Door Seal
• Mounts to front of door
• Stainless steel
• 22-1/2" long
• 1-1/4" wide
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.

NOTE:  For Units BEFORE May 2009.

• Hinge Pin
• Lower door hinge
• w/arm
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.
  

• Comes with hardware
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ST-300 AA, ST-300 AB, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, SHO SERIES, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• Manifold Assembly
• Meat Probe
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Manifold
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.
  

• Switch Kit
• Commonly used on various BLODGETT models such as:  AC-500 XCEL, CTB, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO-100E, SHO-100G, SHO-E, SHO-G and where part is applicable.
  

• Momentary On/Off Micro Switch
• Plunger Door
• Body Size: 49.2 × 17.5 × 24.2 mm (1.94" × 0.69" × 0.95").
• Commonly used on various BLODGETT models such as: DFG-100 XCEL, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V, MARK V XCEL SERIES, MARK V-III, MARK V-IIIH, MARK V-IIIHD, SHO-E, SHO-G, ST-300 AA, ST-300 AB,  ZEPHAIRE E, ZEPHAIRE G and where part is applicable.

• Motor
• 110/208/240 VAC
• Single phase
• 1 speed
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V SERIES, RE SERIES, ZEPHAIRE E, ZEPHAIRE G and where part is applicable.

• Motor Mount Panel
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, SHO SERIES, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• Blower motor
• 110-115V
• 1/3HP
• 2 Speed
• 1140 RPM
• 1725 RPM
• CW rotation
• 5/8 x 3-1/4 shaft
• Does not come with external mount capacitor
• Commonly used on various BLODGETT models such as: DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3, DFG-100, DFG-200, SHO SERIES, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE GL, ZEPHAIRE 200G and where part is applicable.

ON MODEL SHO-G AFTER NOVEMBER 2005  VERIFY SERIAL AND DATE OF MFG PRIOR TO CHECKOUT. If this information is not provided the item is non returnable per the factory. 

• Commonly used on various BLODGETT models such as: BCS-6, COS-6, DFG-100 and where part is applicable.

• Blodgett Nameplate
• 10"
• Commonly used on various Blodgett models such as AC-500, AC-500 XCEL, B36N-HHH, BCM-101E, BCM-101G, BCM-102E, BCM-102G, BCM-102, BCM-202, BCM-202E, BCM-202G, BCM-61, BCM-61E, BCM-61G, BCP, BCP-101, BCP-102, BCP-101E, BCP-101G, BCP-102E, BCP-102G, BCP-202, BCP-202E, BCP-202G, BCP-61, BCP-61E, BCP-61G, BCP-61-101E, BCP-61-61E, BCX-14, BCX-14E, BCX-14G, BLCP-101E, BLCP-101G, BLCP-102E, BLCP-102G, BLCP-202E, BLCP-202G, BLCP-61-101E, BLCP-61-61E, BCX-14, BDO-G, BDO-100G ES , BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, COS-20E, COS-20G, DFG-100, DFG-100 ES, DFG-100 XCEL, DFG-200, DFG-200 ES, HV-100E, MARK V-III, MARK V,  MARK V KFC, MARK V-100, MARK V-100 XCEL, MARK V-200, MG-32, MG3270, MARK V SERIES, MARK V XCEL SERIES, MARK V-IIIH, MARK V-IIIHD, MT2136E, MT2136G, MT3240E, MT3240G, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270E, MT3270, MT3270-CE, MT2136E-AB, MT2136E-CE, MT2136G-AB, MT2136G-CE, SG2136E, SG2136G, SG3240E, SG3240G, SHO SERIES, SHO-E, SHO-G, SHO-100E, SHO-100G, ST-300 AA, ST-300 AB, XCEL-50EC, ZEPHAIRE 100G ES and where part is applicable

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200,MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: 1000, 1048, 1048DD, 1060, 999, DFG-100, DFG-50 POPEYES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• On/Off Red Rocker Cool Down (For 115V Units)
• 1/4" terminals, spade style
• 3 terminals
• Commonly used on various BLODGETT models such as:  BCG, CTB, CTBR, DFG-100, DFG-200, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10 (Prior to 3/1/94), MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ZEPHAIRE E, ZEPHAIRE 200E (with Mechanical Controls) and where part is applicable.

• Orifice Main
• Set of 2
• #56 (drill size)
• Used on various Blodgett models such as 1000, 1048, 1048B, 1048B-CE, 1048BL, 1048BL-CE, 1048DD, 1060, 999, DFG-100, DFG-200, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

 NOTE:  Specify gas type and model number of unit when ordering.

• #72
• Specify size to be drilled to
• Commonly used on various BLODGETT models such as: 1048DD, DFG-100, DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3, DFG-200, DFG-50, DFG-50 POPEYES, 999, 1000, 1048, 1060, FA100, FA200, FA300, FA SERIES, GZL SERIES, GZL-10, ZEPHAIRE G and where part is applicable.

• Lamp Socket
• 600V
• 600W rating
• Porcelain, snap in
• No wire leads
• Commonly used on various BLODGETT models such as 999, DFG-100, DFG-100 XCEL, DFG-200, EF SERIES, EF-111, EZE SERIES, FA Series, FA100, FA200, FA300, GZL Series, GZL-10, MARK V SERIES, MARK V-100, MARK V-200, MARK V XCEL SERIES, MARK V-IIIH, MARK V-IIIHD, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.  

• Panel and Decal Assembly
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.

• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.

• Control Panel
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.

• Black Fan Delay Panel
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.

• Panel
• Black
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.

• Control Panel
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.

• Pilot Burner with Electrode
•  LP 
• 3/16 CCT
• 36" wire lead
• Commonly Used on various BLODGETT models such as: DFG-50, DFG-100, DFG-200, DFG-300, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

* FOR NATURAL GAS APPLICATIONS USE PD44439

• Pilot Assembly
• Natural Gas
• With cable and electrode
• 3/16" OD tubing pilot inlet
• Used on various Blodgett models such as DFG-100, DFG-200, DFG-50, DFG-50 POPEYES, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

* FOR LP APPLICATIONS USE PD11236

• Pilot Orifice
• 3/16 CCT
• LP gas
• .011
• Use for Series: DFG-100, DFG-200, DFG-300, DFG-50, DFG-50 POPEYES, SHO-100G, SHO SERIES, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G (with Solid State Controls)

• Pilot Orifice
• Natural gas
• .021
• Use for Blodgett Series: DFG-100, DFG-200, DFG-300, DFG-50, DFG-50 POPEYES, SHO-G, SHO SERIES, SHO-100G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G (with Solid State Controls)

• Pin & Screws
• Lower new style
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-50, EF-111, EF SERIES, EZE SERIES, FA100, FA200, FA300, FA SERIES, GZL-10, GZL SERIES, MARK V and where part is applicable.

• Upper Door Hinge Pin
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-100 XCEL, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Upper Hinge Pin
• Top pin for bolt
• New Style
• Commonly used on various BLODGETT models such as:  DFG-100, EF-111, EF SERIES, EZE SERIES, FA100, FA200, FA300, FA SERIES, GZL-10, GZL SERIES, MARK V and where part is applicable.

• Mounting Control Plate Assembly
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.

• Mounting Plate
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.

• Door Striker Plate
• Comes with 2 screws
• Use for Series: BCG, CTB, CTBR, DFG, EF/EZE & FA/GZL, RE (Before 7/5/83)
• Use for models such as CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, WPB WARMER and where part is applicable.

• Plug Assembly & Screw, Disconnect
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD and where part is applicable.

• Potentiometer
• with wire leads
• Commonly used on various Blodgett models such as:  AC-500, DFG-100, DFG-200, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Potentiometer, remote 
• Commonly used on various BLODGETT models such as: KCO-25E, 1400, 1405, 1415, AC-500, AC-500 XCEL, BC-20E, BC-20G, BCS-6, BCS-8DS, BCS-8E, BCS-8G, BCX-14, BCX-14E, BCX-14G, BP-100, BP-50, BX-14, BX-14E, BX-14G, CNV-8E, CNV-8G, CNVX-14, CNVX-14E, CNVX-14G, COS-20G, COS-6, COS-8E, COS-8EDS, COS-8G, COS-8GDS, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB1, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-200, DFG-50, FLB-60R, HV-100E, HV-100G, HV-50E, KCO-25E, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Pressure Lock
• Mounts to side of door
• Commonly used on various BLODGETT models such as:  BDO-100G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200G, ZEPHAIRE 100G ES and where part is applicable.

NOTE:  For Units AFTER May 2009 

• Pressure Regulator
• LP
• with nipple
• Commonly used on various Blodgett models such as DFG-100, DFG-200 and where part is applicable.

• Probe - Flame Sensing
• 1-1/4 " Long
• Commonly used on various BLODGETT models such as: BCS-8G, CNV-8G, COS-8G, COS-8GDS, DFG-100, DFG-200, DFG-50, DFG-50 POPEYES, DFG100, DFG50, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G, MG32S, MG3270, MT2136G, MT3255, MY3855G, MT3870 and where part is applicable.

• Meat Probe
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Probe
• 1000 Ohms
• Commonly used on various BLODGETT models such as:  CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, DFG-50 POPEYES, CTB XCEL, CTBR XCEL, DFG-100-ES, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Probe
• 1000 OHM
• Commonly used on various BLODGETT models such as: CTB, CTB XCEL, CTB POPEYES, CTB SERIES, CTB-AP, CTB1, CTBR, CTBR XCEL, CTBR POPEYES, CTBR-AP, CTB Burger King, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Probe
• RTD
• 500 OHM
• T1648
• Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, MT1820E and where part is applicable.

• Probe, Temperature
• Commonly used on Blodgett models such as CTB, CTB Series, CTB-Series, CTB1, CTBR, DFG-100, DFG-200, DFG-50, DFG100, DFG50, Mark V, Mark V Series, Mark V Series and where part is applicable

• Temperature Probe
• Overall 36"
• Probe approximate 5"
• 31" wire leads
• Commonly used on various BLODGETT models such as: 1400, 1405, 1415, BDO-100-G-ES, BDO-G, Blodgett, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB1, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-200, DFG-50, DFG-300 (after 7/1/1986), KCO-25E, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE E, ZEPHAIRE G (with solid state controls), ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE 50E, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

Note: Blodgett changed probe length to 2-3/8". This probe will work the same as old style 5" probe.

• Temperature Probe
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-100 ARBYS, DFG-200, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Temperature Probe
• Commonly used on various BLODGETT models such as:  CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, MARK V, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Probe -Temperature (Solid State)
• 37" wire leads
• Stainless steel
• 1/4" female tab terminals
• 4" bulb
• Commonly used on various BLODGETT models such as:  1400, 1405, 1415, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP (Intelliplus & Intellihold); DFG-100, DFG-200, DFG-300  (Intelliplus & Intellihold); DFG-50 (Intellihold); MARK V (Intelliplus & Intellihold); MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD  and where part is applicable.

• Temperature Probe
• Commonly used on various BLODGETT models such as:  1400, 1405, 1415, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD and where part is applicable.

• Rack Support
• Oven wire shelves slide into these supports which mount on the side walls inside the oven cavity.
• Comes as a set of 2
• Commonly used on various Blodgett models such as:  DFG-200, MARK V-IIIH, RE Series (after 9/91), ZEPHAIRE E, ZEPHAIRE G and where part is applicable.

• Wire Oven Rack Supports
• Sold as a set of two
• Used for right or left hand side
• Commonly used on Blodgett models such as DFG-100 (after 9/86), MARK V (after 9/15/86), MARK V KFC (after 9/15/86), MARK V-IIIHD, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, and where part is applicable.

• Wire Oven Rack Supports
• Sold as a set of two
• Used for right or left hand side
• Used on units prior to 9/15/86
• Commonly used on Blodgett models:  DFG-100, DFG-200, BDO-100G-ES, DFG-100-ES, ZEPHAIRE 100G ES and where part is applicable.

• Wire Rack
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, EF-111, EF SERIES, EZE SERIES, FA100, FA200, FA300, FA SERIES, GZL-10, GZL SERIES, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G and where part is applicable.

Blodgett RACK, WIRE 26 X 26 CHR, PD175623

• Pressure Regulator
• 1/2" Pipe
• Natural Gas
• 1/2 PSIG
• 5.5"- 12" WC
• Commonly Used on various BLODGETT models such as: 901, 911, 916, 931, 951, 961, 966, 981, 900 SERIES, 999, 1000, 1048, 1060, BCG, DFG-100, DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3, DFG-200, FA SERIES, FA100, FA200, FA300, GZL-10, GZL SERIES and where part is applicable.

• Relay and Bracket
• 3 pole DT
• 120V
• 11 spade terminals , 3/16"
• No cover on unit
• Stud mount
• Comes with bracket and screws
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, DFG-50, DFG-50 POPEYES and where part is applicable.

• Commonly Used on various BLODGETT models such as: DFG-100, DFG-200, DFG-50 and where part is applicable.

• Relay
• DPST
• 25A
• 24V
• 6 Terminals, spade
• Commonly used on various BLODGETT models such as:  AC-500 XCEL, BDO-100-G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Carborundum Ignition prior to 2-1986
• 3 wire leads with spade terminals
• Commonly used for Blodgett models: DFG-100, DFG-200 and where part is applicable.

• Relay Tube (Thermal Delay)
• 115V 
• 3A
• Amprite
• Glass tube thermal time delay 9 pin
• Use on various Blodgett models such as DFG-100, DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3, DFG-200, DFG-50, FA SERIES, GZL SERIES, FA100, FA200, FA300, GZL-10 and where part is applicable. 

• Relay
• 3 Amp
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, DFG-50 and where part is applicable. 

• Commonly used on various BLODGETT models: DFG-100 XCEL, DFG-200, DFG-100, MARK V XCEL, MARK V-100 XCEL, MARK V XCEL SERIES and where part is applicable.

• Relay
• 24 Volts AC
• 13 Amps
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, DFG-50 and where part is applicable.

• Relay
• 24 Volts DC
• Commonly used on various BLODGETT models such as:  BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, DFG-100, DFG-100 XCEL, DFG-200, HV-100G, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200 and where part is applicable.
  

• Retainer, Control
• Commonly used on various BLODGETT models such as:  CTB, CTB POPEYES, CTB SERIES, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, MARK V, MARK V KFC, MARK V XCEL SERIES, MARK V-100 XCEL, MARK V SERIES,  and where part is applicable.
  

• Retainer, Control Panel S/S
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200 and where part is applicable.
  

• RH Door Assembly
• Commonly used on various BLODGETT models such as:  BDO-100G-ES, DFG-100, DFG-100 XCEL, DFG-200,  MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-100 XCEL, MARK V XCEL SERIES, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIREG PLUS, ZEPHAIRE 100G ES, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Door assembly
• Stainless steel 
• With glass
• Right hand
• Commonly used on various BLODGETT models such as:  BDO-100-G-ES, BDO-G, DFG-100, DFG-100-ES, DFG-200, DFG-200-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO-100G, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.
  

Doors are not returnable per the factory. If not sure, call us to review before ordering. Have model and serial number ready. 

• Black  Rocker Switch
• 1/4" Spade terminals
• 9 terminals
• High Low switch
• 3PDT
• Fits hole 7/8 x 1-1/2"
• 125V/250V
• 10A @ 250V
• 15A @ 125V
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-100-ES, DFG-200, DFG-200L, DFG-200-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, XR8E, XR8G and where part is applicable.
  

• On/Off Rocker Switch
• Blue, White or Black
• SPST
• 2 terminals, 1/4" tabs
• Fits hole 7/8 x 1-1/2

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, ZEPHAIRE G, ZEPHAIREG PLUS,  ZEPHAIRE 200G and where part is applicable.

• Screws
• Set of 4
• Baffle
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V KFC, MARK V SERIES, MARK V-IIIH, MARK V-IIIHD, MARK V-100, MARK V-200, MARK V-IIIH, RE SERIES and where part is applicable.

• Signal Light - Red, Round, 125V
• Commonly used on various BLODGETT models such as:  BP-100, BP-50, DFG-100, DFG-200, DFG-300 (with Fan Delay with Pulse Plus or with Carborundum Ignition) (Before 2/86), DFG-50  (Before 7/87), ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200G (with Mechanical Controls ) and where part is applicable.

• Signal Light
• Red, Round
• 250V
• Spade terminals
• 1/2" mount size
• Use for Blodgett ovens:
• Commonly used on various BLODGETT models such as:  1400, 1405, 1415, AC-500, BP-100, BP-50, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB1, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-200, DFG-50, KCO-25E, LTO SERIES, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD, MT1820E, MT1828E, MT1828G, MT1828G-CE, MT2136E, MT2136G (Australia & Netherlands), MT3240E, MT3240G, MT3255G, MT3270E, MT3855G, MT3870, MT3270, MT3270-CE, MT3855G-CE, MT3855G-G, MT3870-CE, SHO, SHO-100E, SHO-E, ZEPHAIRE 240E PLUS, ZEPHAIRE 50E, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 200E, ZEPHAIRE 200G  (with Mechanical Controls)and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Upper Door Bushing Sleeve
• Commonly used on various BLODGETT models such as: BDO-100G-ES, DFG-100, DFG-200, DFG-300 (After 1/83), DFG-100 XCEL, DFG-100-ES, DFG-200-ES, KCO-25E, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD and where part is applicable.

• Commonly used on various BLODGETT models such as: 999, 1000, DFG-100, DFG-100 XCEL, DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3, DFG-200, EF-111, EF SERIES, EZE SERIES, FA100, FA200, FA300, FA SERIES, GZL-10, GZL SERIES, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V XCEL SERIES, MARK V-IIIH, MARK V-IIIHD, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE GL, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Relay Socket
• Commonly used on various BLODGETT models such as: BC14E, BC14G, BC14G SERIES, CNV-14E, CNV14G, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB XCEL, CTBR XCEL, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Gas Control Valve
• Pilot out only 3/16" CCT
• 150,000 BTU
• 1/2" FPT in/out
• LP gas
• 24V 
• Commonly used on various BLODGETT models such as:  B14G, BC-20G, BC20G, BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, DFG-100, DFG-200, DFG-50, DFG-50 POPEYES, DFG-300, SHO-G, SHO-100G, ZEPHAIRE 240G PLUS, ZEPHAIRE G which use 24V , ZEPHAIREG PLUS, ZEPHAIRE GL, ZEPHAIRE 100G, ZEPHAIRE 200G with solid state controls, Blodgett ovens with Johnson IID spark ignition made as of 2/86,  and where part is applicable.

• Door Assembly
• Left Hand, Solid
• Commonly used on various Blodgett models such as BDO-100-G-ES, BDO-G, DFG-100, DFG-100-ES, DFG-200, DFG-200-ES,  LTO SERIES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200,  SHO-100G, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G, ZEPHAIRE 100G-ES and where part is applicable

• Controler
• Hold
• Commonly used on various BLODGETT models such as: BCS-8DS, BCS-8E, BCS-8G, CNV-8E, CNV-8G, COS-8E, COS-8EDS, COS-8G, COS-8GDS, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, EF-111, EF SERIES, EZE SERIES, FA100, FA200, FA300, FA SERIES, GZL-10, GZL SERIES, RE SERIES and where part is applicable.

• Commonly used on various BLODGETT models such as: MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, Mark V Series, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE E PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Door Sprocket Assembly w/Pin,
• 14 Teeth
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, DFG-300 (After 1/83), MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, Zephaire E, ZEPHAIRE E PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

Blodgett STACKING KIT BCX14G ON DFG/ZEP, PD176300

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-IIIH, MARK V-IIIHD, MARK V-100, MARK V-200, SHO-G, SHO SERIES, SHO-100G and where part is applicable.

• Rack Support
• 19 x 20"
• Chrome
• For models after 09/1986
• (sides not included) 
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Commonly Used on various BLODGETT models such as: 1400, 1405, 1415, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, LTO SERIES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Door Switch Retrofit Kit
• Includes:
  • roller
  • push button switch
  • bracket.
• 2 spade terminals, 1/4"
• Positions (M) ON/Off
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, EF-111, EF SERIES, EZE SERIES, FA100, FA200, FA300, FA SERIES, GZL-10, GZL SERIES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ST-300 AA, ST-300 AB, ZEPHAIRE E, ZEPHAIRE G and where part is applicable.

• Commonly used on various BLODGETT models such as: AC-500 XCEL, B14G, BC-20E, BC-20G, BC20G, BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, DFG-100, DFG-100 XCEL, DFG-200, HV-100E, HV-100G, SHO SERIES, SHO-100G, SHO-G, XR8E, XR8G, ZEPHAIRE G, ZEPHAIRE 240G PLUS, ZEPHAIRE 100G, ZEPHAIRE 100G ES, ZEPHAIRE 200G and where part is applicable.

• Mode Selector Switch
• Four position switch
• Used for cook and hold feature on those models after January 1985.
• 21A-125/250V
• (Dial revolves all the way around)
• Spade terminals
• Dial not included
• Commonly used on various BLODGETT models such as: CTB, CTBR (After 9/86), DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Mode Selector Switch
• 21A
• 125/250V
• For Cook and Hold units use item #PD128197
• This switch is for ovens with cook and hold before January 1985.
• Commonly used on various BLODGETT models such as: AC-500, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-200, DFG-100, DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3, DFG-50, DFG-50 POPEYES, LTO SERIES, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD and where part is applicable.

• Pressure Kit Switch
• CE
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200 G and where part is applicable.

• Pressure Switch
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, DFG-50, HV-100G, MT1828E, MT1828G, MT2136E, MT2136G, MT3240E, MT3240G, MT3255G, MT3270E, MT3855G, MT3870, MT1820E, MT1828E-CE, MT1828G-CE, MT3255, MT3255-CE, MT3255E, MT3270, MT3270-CE, MT3855G, MT3855G-CE, MT3855G-G, MT3870-CE, SHO SERIES, SHO-100G, SHO-G, XR8E, XR8G, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.

• Push button switch
• Momentary
• Commonly used on various BLODGETT models such as: AC-500, DFG-100, DFG-200, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE E PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: BP-100, BP-50, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: CTB, CTBR, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: AC-500, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, MARK V-IIIH, MARK V-IIIHD, ST-300 AA, ST-300 AB and where part is applicable.

• Rocker Switch
• DPST
• White
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Rocker Switch
• Black
• DPST
• 4 Spade Terminals
• Commonly used on various BLODGETT models such as: 1048DD, 1400, 1405, 1415, 1500, 1501, BP-100, BP-50, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-100 XCEL, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, XR8E, XR8G and where part is applicable.

• Rocker Switch
• Blower
• On/Off
• SPST
• Blue
• Chrome bezel 
• Fits hole 7/8" x 1-1/2"
• 2 terminals
• 1/4" tabs
• 15A/125V
• 10A/250V
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, DFG-100-CH-1, DFG-100-1, DFG-100-2, DFG-100-3, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, WPB WARMER and where part is applicable.

• Temp Switch
• 8 Position
• Wires included
• Commonly used on various Blodgett models such as CTB, CTB Popeyes, CTB Series, CTB Wendys, CTB-AP, CTB1, CTBR, CTBR Popeyes, CTBR-AP, DFG-50, DFG-100, DFG-200, DFG-300 (After 7/1/86), MARK V (After 7/1/86), MARK V KFC, MARK V Series, MARK V-100, MARK V-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: AC-500 XCEL, BC14E, BC14G SERIES, CNV-14E, CNV14G, DFG-100 XCEL, DFG-100, DFG-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-100 XCEL, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Thermal Switch
• SPDT
• Commonly used on various Blodgett models such as 1400, 1405, 1415, AC-500, BDO-100-G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, KCO-25E, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G, ZEPHAIRE 100G-ES and where part is applicable.

• Thermostat
• Robertshaw
• Style KX
• Temperature range 140-550 degrees F
• Bulb Size 3/16" X 11-5/8"
• 36" Capillary
• 120V/277VAC 
• SPST breaks on temperature rise
• Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO-E, SHO-G, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• K Thermostat
• Bulb 3/16 x 11-5/8 long
• Hold thermostat
• 140-500 F
• Commonly used on various BLODGETT models such as:  DFG-100, DFG-200, DFG-50 (Cook only), EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10  (cook & hold with electric ignition) and where part is applicable.

• Thermostat
• Commonly used on various BLODGETT models such as:  CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE E, ZEPHAIRE E PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Thermostat
• KX-38-36
• Bulb- 3/16" X 11-5/8"
• Commonly used on various BLODGETT models such as:  1200, 1201, 1214, CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, EF SERIES, EZE SERIES, MARK V, MARK V KFC,  MARK V SERIES, MARK V-100, MARK V-200, RE SERIES and where part is applicable.

• Commonly Use on various BLODGETT models: DFG-100, DFG-200 and where part is applicable

• Commonly used on various BLODGETT models such as: DFG-100 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: AC-500, DFG-100, DFG-200, MARK V, MARK V KFC, MARK V-100, MARK V-200, MARK V SERIES and where part is applicable.

• Timer - 12 Hour
• 125/250V
• Commonly used on various BLODGETT models such as: DFG-50, DFG-100, DFG-200, DFG-300 (After 1/85 & Solid State) and where part is applicable.

• Dial Knob
• 1-3/8" Diameter
• 1/4" D-Stem Mount
• Black
• Plastic
• Used on timer before May 1983
• Commonly used on Blodgett models such as 1200, 1201, 1214, CTB, CTBR, DFG-100, DFG-200, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR POPEYES, CTBR-AP, DFG-50, SHO-E, EZE SERIES, EF SERIES, EF-111, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, RE SERIES and where part is applicable.

• Manual timer
• 30 minute time span 
• 120V
• Wire leads
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, DFG-50 and where part is applicable.

• 6 Hour Timer
• 120 Volts
• Commonly used on Blodgett models such as: 1200, DFG-100, DFG-200, MARK V SERIES and where part is applicable

• Timer, 60 minute
• 120/240V
• Commonly used on various BLODGETT models such as: 1200, 1201, 1214, 1400, 1405, 1415, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, RE SERIES, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.
• Timer does not come with dial

• Electric Timer
• 60 minute range
• 240V
• Commonly used on various Blodgett models such as: 1400, 1405, 1415, CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTB1, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 240E PLUS, ZEPHAIRE 50E, ZEPHAIRE 100E, ZEPHAIRE E, (All w/Solid State Controls), ZEPHAIRE 200E and where part is applicable.

• Commonly used on various BLODGETT models such as: AC-500, CTB, DFG-100, DFG-200, DFG-50, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200, ZEPHAIRE 50E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Timer, Fan Delay
• 10 Minutes, 115-120 Volts, 60Hz
• Commonly used on Blodgett models such as DFG-100, DFG-200, DFG-50 and where part is applicable

• 2 Second Fixed Timer
• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, DFG-50, MT1828G, MT2136E, MT2136G, MT3240E, MT3240G, MT3255G, MT3270E, MT3855G, MT3870, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: 1200, DFG-100, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Window Installation Tool
• Stainless Steel
• Used to install Blodgett glass window
• Commonly used on various BLODGETT models such as: BDO-100G-ES, BDO-G, CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, MARK V XCEL SERIES, MARK V-100 XCEL, SHO-100E, SHO-100G, SHO-E, SHO-G,  ZEPHAIRE 100G ES and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.

• Commonly Used on various BLODGETT models such as: DFG-100, DFG-200, RE SERIES, MARK V SERIES, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, RE SERIES, ZEPHAIRE G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• New style transformer
• 115/24V
• Commonly used on various BLODGETT models such as: AC-500 XCEL, BDO-100G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, DFG-50, DFG-50 POPEYES, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: CTB, CTB POPEYES, CTB SERIES, CTB WENDYS, CTB-AP, CTB1, CTBR, CTBR POPEYES, CTBR-AP, DFG-100, DFG-200, DFG-50, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, XR8E, XR8G, SHO-G, SHO-100G, ZEPHAIRE 240E PLUS, ZEPHAIRE E, ZEPHAIRE 100E, ZEPHAIRE 200E and where part is applicable.

• Transformer
• 1.25A
• 3-1/4 x 2-1/8"
• 120V Steps Down to 24V
• Commonly used on various BLODGETT models such as: AC-500 XCEL, BDO-100G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, DFG-50, DFG-50 POPEYES, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G (with Solid State Controls), ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

• Transformer
• 115/230v to 24v
• 56A
• Commonly used on various Blodgett models such as B14G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-E, SHO-100E, XR8E, XR8G, ZEPHAIRE E, ZEPHAIRE E PLUS, ZEPHAIRE 200E and where part is applicable.

• Commonly used on various BLODGETT models such as: 1048DD, AC-500, AC-500 XCEL, DFG-100, DFG-200, ST-300 AA, ST-300 AB and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, EF SERIES, EF-111, EZE SERIES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V, MARK V KFC, MARK V-100, MARK V-200, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Center Door Trim Assembly
• Stainless Steel
• 22-1/2"
• 1-3/4" width on folded back side
• 3/4" wide on 5 each stud side
• For Units with Dependent Doors
• Commonly used on various BLODGETT models such as: BDO-100G-ES, BDO-G, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, MARK V, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V XCEL, MARK V-100, MARK V-100 XCEL, MARK V-200, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, SHO SERIES, SHO-100E, SHO-100G, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 100G ES, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, ST-300 AA, ST-300 AB and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIREG PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G and where part is applicable.

•  Pilot Tube Assembly
• Commonly used on Blodgett models such as DFG-100, DFG-200, SHO-G, SHO SERIES, SHO-100G, ZEPHAIRE 100G, ZEPHAIRE 200G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS and where part is applicable

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Polyeruthane Tubing
• Sold by the Inch
• Use on Blodgett models such as B36N-HHH, BDO-100G-ES, BDO-G, DFG-100, DFG-100-ES, DFG-200, DFG-200-ES, DFG-50, HV-100G, MT1820E, MT1828E-CE, MT1828G-CE, MT3255, MT3255-CE, MT3255E, MT3255G, MT3270, MT3270-CE, MT3855G-CE, MT3870-CE, SG3240E, MT1828E, MT1828G, MT2136E, MT2136G, MT3240E, MT3240G, MT3255G, MT3270E, MT3855G, MT3870, SG2136E, SG2136G, SG3240G, SHO SERIES, SHO-100G, SHO-G, ZEPHAIRE G, ZEPHAIREG PLUS and where part is applicable

Gas Safety Assembly
Natural gas
24V
1/2 FPT
4-1/4" width
200,000 BTU
Includes:
2 x 1/2" close nipples
12" wire lead with 1/4" connector
1/2" CCT x 1/2" MPT elbow
Includes Natural to LP kit
Commonly used on various Blodgett models such as: B14G, BC-20G, BC20G, BCX-14, BCX-14E, BCX-14G, BX-14, BX-14E, BX-14G, CNVX-14, CNVX-14E, CNVX-14G, DFG-100, DFG-200, DFG-300, DFG-50, DFG-50 POPEYES, SHO-100G, SHO-G, ZEPHAIRE 240G PLUS, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100G, ZEPHAIRE 200G (which use 24V) and where part is applicable.

• Gas Valve
• Shut off
• Manual
• 1/2" In/Out
• with Chrome Handle
• Commonly used on various BLODGETT models such as:  1000, 1048, 1060, 901, 911, 911P, 916, 931, 951, 961, 961P, 966, 981, 999, DFG-100, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, XR8E, XR8G and where part is applicable.

• Vent Assembly
• Used on various Blodgett models such as DFG-100, DFG-200, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS and where part is applicable.   

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, GZL SERIES, GZL-10 and where part is applicable.

• Commonly used on various BLODGETT models such as: DFG-100, DFG-200, FA SERIES, FA100, FA200, FA300 and where part is applicable.

• Commonly Used on various BLODGETT models such as: BDO-100G-ES, DFG-100 XCEL, DFG-200, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-50, DFG-50 POPEYES, MARK V XCEL, MARK V XCEL SERIES, MARK V-100 XCEL, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ZEPHAIRE 100G ES and where part is applicable.

• Blower Wheel
• 9-7/8 x 2-1/8
• 5/8 keyway
• 2 square bolts
• CW rotation
• Concaved
• 6 x 1-5/8 holes in back
• Used on various Blodgett models such as DFG-100, DFG-100 XCEL, DFG-200, SHO, SHOSERIES, SHO-100G, SHO-G and where part is applicable.

• Light Switch
• White 
• Rocker
• On/Off
• For 115V Units
• 15A/125, 10A/250V
• 2 terminals, 1/4"
• Color white
• Fits hole 7/8 x 1-1/2
• SPST
• Commonly used on various BLODGETT models such as: BDO-100-G-ES, BDO-G, DFG-100, DFG-200, DFG-100-ES, DFG-200, DFG-200-ES, FA SERIES, FA100, FA200, FA300, GZL SERIES, GZL-10, MARK V KFC, MARK V SERIES, MARK V-IIIH, MARK V-IIIHD, ZEPHAIRE E, ZEPHAIRE G (Prior to 3/1/94), ZEPHAIRE E PLUS, ZEPHAIRE G PLUS, ZEPHAIRE 200E, ZEPHAIRE 200G and where part is applicable.

• Door Window Glass
• 17-1/8" x 10-1/8" x 1-3/4" thick
• Commonly used on Blodgett models such as AC-500 XCEL, BDO-100G-ES, BDO-G, CTB, CTB POPEYES, CTB WENDYS, CTB-AP, CTB-G, CTB-GFB, CTBR, CTBR POPEYES, CTBR-AP, CTBR-G, CTBR-GFB, DFG-100, DFG-100 XCEL, DFG-100-ES, DFG-200, DFG-200-ES, DFG-50, DFG-50 POPEYES, EF SERIES, EF-111, EZE SERIES, MARK V, MARK V Xcel, MARK V KFC, MARK V SERIES, MARK V XCEL SERIES, MARK V-100, MARK V-100 XCEL, MARK V-200, MARK V-IIIH, MARK V-IIIHD, SHO, SHO SERIES, SHO-100E, SHO-100G, SHO-E, SHO-G, ST-300 AA, ST-300 AB, ZEPHAIRE 240E PLUS, ZEPHAIRE 240G PLUS, ZEPHAIRE E, ZEPHAIRE G, ZEPHAIRE G PLUS, ZEPHAIRE 100E, ZEPHAIRE 100G, ZEPHAIRE 200E, ZEPHAIRE 200G, ZEPHAIRE E PLUS, ZEPHAIRE 100G ES, ZEPHAIREG PLUS & where part is applicable. 

• Oven Rack
• Chrome
• 20-7/8 x 28-1/4" 
• Commonly Used on various Blodgett models such as: DFG 100 (Before 9/15/86), DFG-100 XCEL, DFG-100, DFG-200, EF SERIES, FA SERIES, FA100, FA200, FA300, EZE SERIES, GZL SERIES, GZL-10, SHO-G,  MARK V KFC, MARK V SERIES, MARK V-100, MARK V-200 and where part is applicable.